Type R rear wheel bearing part No's wanted
 

Does anyone know the part number for the rear wheel bearing in a MY99 type R , everyone I have asked so far inc the local dealer hasn't got a clue
Cheers Ian

if you find out can you post it up cos im having the same problem:brickwall .Why did i buy an import :cry:

NTN -4T-CRI -08A02

Ian, you have personal mail - David

All in stock at API; 81.13 + VAT for a ' kit ' [ bearing and 2 seals ] No need for the circlip and the drive shaft nut, you can re-use the originals.

David APi

Ian,

The part numbers for origonal factory fitted parts are:

Bearing - 28016PA010 - £59.58 + Vat from a dealer

Outer Oil Seal - 28015AA070 - £10.35 + Vat

Inner Seal - 28015AA080 - £11.67 + Vat

Phil

APi beats the 'Stealers' by 64p Yippee!!, what value. l'll round it up to a whole pound when you order :D

David APi

Cheers for the replies and PM's , got blue print ones in the end as a complete kit with bearings , inner and outer seals , circlip and shaft nut.

Changed all 4 corners while I was at it !

Cheers Ian

How much did they cost you in the end Ian???

Looks like like Camskill now sell these rear Wheel Bearings for the STI Type R: IMPREZA PARTS 2.0I TURBO GC8/GF8 EJ20G EJ205 93 TO 2000 IMPORT Rear Wheel Bearing Kit - 70mm IMPREZA 2.0i Turbo GC8/GF8 EJ20G EJ205 93 TO 2000 Import :: £57.74 :: Subaru Impreza Turbo Parts, Tuning, Spares & Accessories :: 2.0i Turbo GC8/GF8 93 TO 00

I know this is an old thread but I'm currently having a similar problem.

I bought bearings in North America for the 1991 - 1999 tubro legacy which also fit the 2002 WRX etc. Sadly these bearings were too small for my 1998 Type RA. Ian, I believe my car and your Type R would carry the same diffs and hubs etc.

I cross checked the bearing part number that PeeVee provided in a North American database and it returned the rear wheel bearings for the 2005 North American STi. Is it safe to assume that these use the same bearings? Any clarification on this would be great!

Also Ian, Is it possible you or anybody else could give me the part numbers I would need for the front too?

Thanks!:thumb: