where should i put it...?
 

...three bond that is :D

I'm refitting my rocker cover gasket for the second time and although Zak and Luke at Mocom gave me some instructions I've thrown them away:rolleyes:

Any advice gratefully received...here's a pic to aid :thumb:

ian

http://img.photobucket.com/albums/v4...s/IMG_8023.jpg

bump...anyone?

I always put it around the bottom half of the outside gasket, both of the spark plug hole gaskets, and remove and reseal the 2 plastic half moons in the back of the head.

You may also want to put a very small amount around the bottom 3 bolt seals.

thank you :notworthy

I did it all around the bottom half of the rocker cover, as well as all six bolts and the plug holes. No leaks.

thanks Silent, just for clarities sake you are both talking about applying it to the outside face of the gasket- the one that is visible in the pic?

bttt

Yes :) - You may want to remove the gasket and clean out the groove that the gasket sits in, in the cover itself.

thank you...I have had a bit of a clean out, see post 63; https://www.scoobynet.com/projects-4...-fettle-3.html