brembo bolts
 

does anyone know the size dia and length for the bolts that hold the brembo's on, as I have just picked up a set but think the bolts may be different to the wrx, so I want to get them ready to change over, also other than the calipers and discs and bolts is that all I need, ie do all the brakelines match up ok.

Thanks
Darren

The bolts are different, I need some too and was going to ask Ian at Godspeed if he can do them.:thumb:

thanks if you find out before me let me know, I will do the same

Darren

think they are M12x1.5mm from memory but can easily check the set on the shelf in the w/shop Monday..............

defo different to std Subaru brakes

alyn

far as i know they are m12 x 1.5, off to get me front one re done with a helicoil, last person to have them off stripped them and just used loctite to hold em in :wonder:

I have now checked the calipers and they are M12 x 1.5P, does anyone know the length of the bolts required, as I have phoned Subaru and they require over £11 per bolt, I think this is far over priced and intend to use grade 12.9 bolts or cap screws which are more than up to the job, If I cannot find out the length I will have to get 50mm or 60mm bolts and just cut them down to suit when I fit the brakes. So if anyone can help it will save me some time and will be appreciated,

Thanks
Darren