Front mount fitting
 

Hiya, Wondered if anyone is around to help me fit my HKS front mount in time for the Jolly green monster remap group buy?

If possible would like to get it fitted the weekend of the 26th 27th of April.
I'm booked in on the 2nd May for a Simtec ecu :)

Any help would be most appreciated

Many Thanks

Darren

Simb and Daz were both saying last night about getting stuck into a front mount but I suspect your dates might be a bit short notice:(

Catyluna 172 aka Lee may be able to help you out m8.

would love to give a hand mate but i have so much work on and also getting my car sorted aswell for the map and performance day :( been all day on mine today and its stripped to bits again turbos of exhaust off ect just to fit one little part :mad: :freak3:

Then again maybe not:freak3: when you do get time m8 let me know about them samples.... thats wot i came up for the other day.

Normally i would help no problem, but i'm in the same position as Lee (catalunya 172), i've got loads to do on my car, including running the engine once i get it back.

What's happened Lee ?

I'm in Reading that weekend as well I'm afraid.... you have picked a busy period here for most of the gang I'm afraid.

Check out page 2 of the good times bad times thread there are 3 seperate fitting sessions linked with pictures on each.

bit of a mission si :brickwall where you have the original fpr you replace it with a bit that comes with the fuel lab fpr but as the td05 20 gram is so big you cant get the pipe on or part in :mad: so i had to take turbo ect off to put longer pipe ect

Nightmare :eek: any skin left ?

You might be needing one of these if any first aid is reqd:luvlove:



http://static.zoovy.com/img/summitfa...nurse6598b.jpg

Ok nps guys, just a thought :)

Thanks for the replys

The other option is to take it to Prospeed in Cardiff.

hi darren the car is looking lovely mate.what are your plans now to getting the front mount fitted.

Me and my mate will probably fit it.
I was looking for someone that had done it before so we don't mess up. I won't be very happy if i mess up my P1 :cry:

Not to worry we will get it done :)

How much do prospeed charge to fit a front mount?

Would guess it's pretty much like the Hybrid to do, not hard really, the worst bit is removing, cutting and refitting the bumper, the rest is easy. :thumb:

When i'd did my first one (autobahn88) i got a bodyshop to do the stuff with the bumper, second time round (Hybrid Gt spec) me and chris (WRX RCY) did it but obivously the bumper was already modded then

About £300

Check out these threads

https://www.scoobynet.com/members-ga...-uk-turbo.html

https://www.scoobynet.com/members-ga...y-wry-rcy.html

These threads will help. And just take your time when you cut into the wing and the bumper.

I wouldnt mind losing a finger :norty: