Helpt with Xenon kit- Urgent
 

Hi guys,

I'm currently in Hong Kong on holiday and I've just bought a HID kit at 6000k and 35w (didnt have 55w).

Was a few kits at different prices so I went for the more expensive kit thats made in Japan instead of China and the ballats unit was much smaller.

there's a few wires on the bulb that comes with the kit but I'm not sure what plugs where even the lady demostrated the kit works.

https://i32.tinypic.com/34qkboy.jpg

the two cabels (top left) plugs straight into the Ballasts marked "out" no problem.

the second cable (bottom) plugs into the Ballast marked "in" - This is what I'm not sure about.

the other two wires in the photo also dont have a clue about. (lady connected power to demo the kit here)

here's the Ballast.

https://img172.imageshack.us/img172/7946/balletsny9.jpg

two cables. one marked "in" and the other marked "out"

'm assuming the "out" goes to the HID bulbs

Now, what plugs into the "in"?

should it be power from car or plug into the cable on the HID bulb?

They plug into your original bulb holder to turn the HIDs on and off as required.
Thanks,
Paul.

Cool

Thanks :thumb: