|
Polished Bliss: A whole week with a prancing horse!
This one kept Clark busy last week...
--- Well this was my most enjoyable detail yet in the whole time I’ve been a professional detailer. The owner has recently signed up for a maintenance contract with us and Rich had originally booked the car in for 3 days to allow for all the little details to be done to the standard we would like, but due to a couple of people re-arranging dates for their details I ended up getting the car for the whole week to play with! Some of you may be thinking that a week on one car is a bit excessive and surely not needed but as you will see in the write up below, this isn’t necessarily the case when we’re talking about the world of detailing! The owners last Ferrari had been detailed by a different company previously who didnt do a particularly good job so this made me even more determined to get his new pride and joy as spot on as possible... :thumb: So, on with the detail: Monday The car arrived at 9am sharp, not looking too bad – it shouldn’t really as there’s only just under 800 miles on the clock so it was pretty clean to be fair: https://img.photobucket.com/albums/v...k_VTR/Cf1c.jpg Firstly, the car was pre-rinsed at high pressure @40 degrees: https://img.photobucket.com/albums/v...k_VTR/Cf1e.jpg Meguiars Super Degreaser was used to clean the arches and tyres, with Menzerna 7.5 being the choice for the wheels and calipers: https://img.photobucket.com/albums/v...rk_VTR/Cf1.jpg https://img.photobucket.com/albums/v...k_VTR/Cf1a.jpg https://img.photobucket.com/albums/v...k_VTR/Cf1b.jpg The car was then washed with the 2 bucket method and Meguiars Shampoo Plus, then clayed with Meguiars Mild Detailing Clay. No need for Tardis on this detail as there was very little in the way of tar stuck to the car at all. I then gave the engine a quick going over with a MF mitt as I didn’t want to risk pressure washing this one (being rather expensive and Italian! :p ). The car was then rinsed off: https://img.photobucket.com/albums/v...k_VTR/Cf1i.jpg I then dried it off with a waffle weave and the leaf blower. Next stage was to get the car inside and all taped up ready for polishing, then I took PTG readings: https://img.photobucket.com/albums/v...k_VTR/Cf1g.jpg The car was incredibly consistent throughout, reading from 180-210 microns so a nice healthy amount of paint all round. Defects weren’t too bad, swirls were at a minimum really: https://img.photobucket.com/albums/v...k_VTR/Cf1k.jpg Whilst the swirls were minimal, there were quite a lot of RIDS and random “nicks” in the paint, more than likely installed from the dealership as there was product residue on the trims and the car just had that “washed with a sponge” look about it. I initially started out with Menzerna 3.02 on a Meguiars Polishing Pad but the Menz was playing up a wee bit so I swapped to Meguiars 83: https://img.photobucket.com/albums/v...k_VTR/Cf1d.jpg This broke down perfectly… https://img.photobucket.com/albums/v...k_VTR/Cf1h.jpg Leaving a perfect finish… https://img.photobucket.com/albums/v...k_VTR/Cf1j.jpg https://img.photobucket.com/albums/v...k_VTR/Cf1f.jpg I completed the de-swirling of all the larger areas of bodywork with the rotary, leaving the smaller/tighter areas for the Megs machine the following day. 7pm and end of day 1 Tuesday The start of day 2 began at 1 o clock (I was in court in the morning) and saw the new Meguiars Machine being brought out for its first outing to de-swirl the smaller areas. I used a 4” cutting pad with Menz 3.02: https://img.photobucket.com/albums/v...VTR/Cf1k-1.jpg https://img.photobucket.com/albums/v...k_VTR/Cf1r.jpg First impressions of the machine were very good – It feels a lot more refined than the PC and definitely produces a good bit more power but with less vibrations. I don’t like using the PC as I get numb hands after ten or 15 minutes but I operated the Megs machine for a good few hours with no problems at all. Downsides in my eyes are the large guard round the counter weight, which can make centering a spot pad when using a 3.5” backing plate rather difficult. I found it quicker to remove the backing plate, center the pad and then screw it back in. The other downside is again with the guard, due to its size I would have preferred it to have a rubber coating or something similar instead of metal, as the chances of possible damage to the paint when coming in contact with the guard are quite high due to its size (chances are increased further when working on a car such as the Ferrari with its different curves and angles). This is why you can see I have wrapped our one in masking tape in the pics above. Other than that, I was quite impressed with the machine and I like the design of the wrap around handle. Below are a few pics of the correction work as I progressed around the car, using the machine at speed 5: https://img.photobucket.com/albums/v...k_VTR/Cf1l.jpg https://img.photobucket.com/albums/v...k_VTR/Cf1n.jpg before: https://img.photobucket.com/albums/v...VTR/Cf1g-1.jpg after (excuse the smears): https://img.photobucket.com/albums/v...VTR/Cf1j-1.jpg before: https://img.photobucket.com/albums/v...k_VTR/Cf1w.jpg after: https://img.photobucket.com/albums/v...k_VTR/Cf1o.jpg I couldn’t miss out the number plate either! https://img.photobucket.com/albums/v...VTR/Cf1h-1.jpg Top of the front bumper before: https://img.photobucket.com/albums/v...VTR/Cf1i-1.jpg after: https://img.photobucket.com/albums/v...k_VTR/Cf1v.jpg before: https://img.photobucket.com/albums/v...k_VTR/Cf1p.jpg after: https://img.photobucket.com/albums/v...VTR/Cf1l-1.jpg Lower half next to air intake before: https://img.photobucket.com/albums/v...k_VTR/Cf1y.jpg after: https://img.photobucket.com/albums/v...k_VTR/Cf1t.jpg There were sections that were also suffering from buffer trails: https://img.photobucket.com/albums/v...k_VTR/Cf1m.jpg https://img.photobucket.com/albums/v...k_VTR/Cf1q.jpg after: https://img.photobucket.com/albums/v..._VTR/Cf1yy.jpg Rear lights were also polished: https://img.photobucket.com/albums/v...k_VTR/Cf1s.jpg As was the rear Carbon Fibre section as this was showing bad cases of micro-marring: https://img.photobucket.com/albums/v...k_VTR/Cf1z.jpg after: https://img.photobucket.com/albums/v..._VTR/Cf1zz.jpg https://img.photobucket.com/albums/v...k_VTR/Cf1x.jpg Last job for the Megs machine was to polish the headlights, which didn’t really need it but i did it anyways! https://img.photobucket.com/albums/v...VTR/Cf1d-2.jpg That was the correction work nearly completed. As I had been working my way round the car I marked any RIDS that were slightly too deep to remove with polishing alone. They were mostly along the tops of the wings and back quarters for some reason: https://img.photobucket.com/albums/v...VTR/Cf1d-1.jpg These RIDS were sanded back with 3000 Unigrit that had been soaking for 24 hours as I was pretty sure I was going to need it at some point when I first saw the car on Monday: https://img.photobucket.com/albums/v...VTR/Cf1e-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1a-1.jpg This made a 99% improvement on all the scratches and even I had to look really hard to see the remaining 1 or 2 that were still there. After polishing with Megs 83 and the rotary: https://img.photobucket.com/albums/v...VTR/Cf1f-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1b-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1c-1.jpg This was all the paintwork fully corrected so I called it a night. 9pm and end of day 2 Wednesday: Start of day 3 began with Menzerna PO85rd finishing polish and a 3M finishing pad: https://img.photobucket.com/albums/v...VTR/Cf1g-2.jpg Usually I would use 3M’s Ultrafina but we have loads of the Menz to use up so I fancied a change. This was worked at 1500rpm’s: https://img.photobucket.com/albums/v...VTR/Cf1b-2.jpg I always use the halogens to keep the panels warm when working with the Menzerna: https://img.photobucket.com/albums/v..._VTR/Cf1-1.jpg Once the rotary work was completed I went round the smaller areas again with the Megs machine and a 4” polishing pad and 85rd. This was worked at speed 5. https://img.photobucket.com/albums/v...VTR/Cf1f-2.jpg Once all final polishing had been completed I removed the masking tape from around the window rubbers etc before buffing off the polish. My reason for this is so that I can first remove any product residue left from the edge of the tape with a separate MF: https://img.photobucket.com/albums/v...VTR/Cf1e-2.jpg This prevents you from catching any traces of residue or excess polish in your mf which can then marr the paint and prevent you from creating a perfect finish. I always use a separate mf to run around all panel gaps before buffing off on the larger panels too. Next job was to give the car a dust down: https://img.photobucket.com/albums/v...VTR/Cf1c-2.jpg I then applied the cars first coat of Vintage and left to cure while I dressed the tyres with Blackfire Long Lasting Tyre Gel and sealed the wheels/calipers with PB Wheel Sealant. Arches weren’t dressed as these were perfectly clean and as the car was brand new in September they were still nice and black: https://img.photobucket.com/albums/v...VTR/Cf1a-2.jpg I then buffed off the wax and called it a day. 7pm and end of Day 3 Thursday Thursday morning began with a quick dust down of the car again before I applied the cars 2nd coat of Vintage, with the 1st coat having cured over night. This was buffed off after i'd had a short coffee break :) I then polished the tailpipes, these are a funny material and were quite tarnished/stained but Meguiars NXT and Blackfire Fine Cut Metal Polish got them back to new again: before: https://img.photobucket.com/albums/v...VTR/Cf1f-3.jpg after: https://img.photobucket.com/albums/v..._VTR/Cf1-2.jpg The engine was next: The silencer needed a bit of a spruce up already: https://img.photobucket.com/albums/v...VTR/Cf1w-1.jpg Meguiars NXT Metal Polish on a 4” polishing pad & German Applicator gave the following result: https://img.photobucket.com/albums/v...VTR/Cf1x-1.jpg before: https://img.photobucket.com/albums/v...VTR/Cf1a-3.jpg after: https://img.photobucket.com/albums/v...VTR/Cf1p-1.jpg I would have liked to have removed the swirls fully but I needed to make sure I got everything else on the car finished first. 303 Aerospace was used to dress the engine bay: https://img.photobucket.com/albums/v...VTR/Cf1i-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1s-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1t-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1u-1.jpg HD Cleanse was used for the glass: https://img.photobucket.com/albums/v...VTR/Cf1n-1.jpg Onto the Interior next, this was hovered before I used Zymöl Leather Cleaner on all leather and vinyl: https://img.photobucket.com/albums/v...VTR/Cf1k-2.jpg The Glass was cleaned inside with HD Cleanse and the outside with Werkstatt Prime Strong. I then used a mf with a couple mists of Field Glaze to remove any finger prints etc from the carbon trim: https://img.photobucket.com/albums/v...VTR/Cf1o-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1r-1.jpg I then used the Halogens to heat up the seats prior to feeding them: https://img.photobucket.com/albums/v...VTR/Cf1j-2.jpg These were left for about 15 mins while I cleaned all the product reside from the trims that the Dealers had kindly given me for free,using Apc and then applying Zymöl Carbon to all exterior trim: before: https://img.photobucket.com/albums/v...VTR/Cf1g-3.jpg after: https://img.photobucket.com/albums/v...VTR/Cf1b-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1q-1.jpg The seats had now warmed up nicely so I fed them with Treat: https://img.photobucket.com/albums/v...VTR/Cf1l-2.jpg And then conditioned the rubbers with “Seal”: https://img.photobucket.com/albums/v...VTR/Cf1h-2.jpg Werkstatt Prime Strong was again used for the sills: https://img.photobucket.com/albums/v...VTR/Cf1v-1.jpg Shuts were waxed too: https://img.photobucket.com/albums/v...VTR/Cf1m-1.jpg Interior Pics: https://img.photobucket.com/albums/v...VTR/Cf1d-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1c-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1e-3.jpg https://img.photobucket.com/albums/v...TR/Cf1zz-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1z-1.jpg https://img.photobucket.com/albums/v...TR/Cf1yy-1.jpg https://img.photobucket.com/albums/v...VTR/Cf1y-1.jpg I then applied a 3rd coat of Vintage and left it on the car overnight. 7pm and end of Day 4 Friday: Final day of the detail was a nice easy one to finish off as the car was 99% finished. All that was required was to buff off the 3rd coat of Vintage that had been left on overnight and then give it a wipe down with Field Glaze as there were quite a lot of oils rising from the paint by this point. The rest of the morning/afternoon was spent taking loads of pics (I took over 350 during the week!!!) to try and capture the finish as best as I could as the car was now looking stunning. There was a noticeable difference as each layer of Vintage went on and cured, the paint was incredibly wet and glossy and gave off a vibrancy that we’ve only seen from this wax so far. I put the car outside so we could mop the floor and generally tidy up the studio again and luckily the sun started to come out, so I got some nice outdoor shots: https://img.photobucket.com/albums/v...TR/Cf1zz-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1l-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1k-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1j-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1i-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1h-3.jpg https://img.photobucket.com/albums/v...VTR/Cf1g-4.jpg https://img.photobucket.com/albums/v...VTR/Cf1f-4.jpg https://img.photobucket.com/albums/v...VTR/Cf1e-4.jpg https://img.photobucket.com/albums/v...VTR/Cf1d-4.jpg https://img.photobucket.com/albums/v...VTR/Cf1u-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1c-4.jpg https://img.photobucket.com/albums/v...VTR/Cf1a-4.jpg https://img.photobucket.com/albums/v...VTR/Cf1b-4.jpg https://img.photobucket.com/albums/v..._VTR/Cf1-3.jpg I then put the car back inside to what was now a nice and tidy studio again, complete with a new 430 Scuderia Picture sent to us by Chris_A3 – many thanks mate, it looks great! https://img.photobucket.com/albums/v...VTR/Cf1y-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1v-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1s-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1r-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1q-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1o-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1p-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1n-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1m-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1x-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1z-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1w-2.jpg https://img.photobucket.com/albums/v...VTR/Cf1t-2.jpg So there you have it, the best part of 5 days and over 30 hours work, and to be honest I could easily have spent longer on the car if I could have. I also think this goes a long way in showing just what a high end wax can give in terms of the ultimate finish over those "lesser" waxes. Yes its mostly down to the prep but a decent wax will add that bit extra in my eyes. Hopefully you enjoyed the write up and stupid amount of pics, its taken me well over 4 ½ hours to sort them all out and type this up so many thanks for looking as always! :thumb: |
Good God!!!
Well done, incredible work and a fantastic finished product. Would love to know ££££££??????? Keep up the good work. |
Outstanding work :thumb:
|
brilliant job of a beautiful car.. couldnt help notice the rear number plate.. my brother works for them in edinburgh....lucky *****
|
Nice work, what was the owners reaction? :)
|
looks great guys i carnt belive how shiney the tyres look lol....
|
Fantastic. :cool:
|
Great detail and a fantastic car but that many dealer inflicted defects on a new £100K+ car is shocking.
|
Very nice work Clark and well done on the maint contract guys.
Its a shame you cant post img instead of links here but suppose saves bandwidth. Tim |
Not bad;):p
|
Its a shame you cant post img instead of links here but suppose saves bandwidth. Stunning job there, hard to believe a car with so few miles could need so much work and look so much better for it. |
I was going to say... we always post images using img tags??? :confused:
|
Nice job!!
Get some decent pics up of a detail on a Scooby next time, not some crappy Ferrari :rolleyes: G |
lol......
|
:luvlove: :notworthy great photos 2
|
Originally Posted by bugeyeandy
(Post 7563571)
He has! Maybe you've got images turned off in your User CP (I did until I realised :))
|
now - that's detailing!
It took a lot of time for me to even FIND a place who allegedly detail cars that knew what a clay bar was lol.... great job :) |
Excellent write up and photos, an enjoyable read :)
Not a bad car to spend a week with :luvlove: |
wow !!!.................just wow :eek: :notworthy
I would love for you to post what the owner said :lol1: |
Absolutly awsome mate, your attention to detail is amazing! Nice to see someone has that much pride in there work.
|
Marvelous as usual.
I do like the way Polished Bliss present their detailing photos. It rather reminds me of how a porn mag show off one of their 'ladies'.....................revealing a little bit to begin with, then tantalising the reader with some more...............before that centre spread revealing her in full glory. :D |
Great results guys.
However, If I was the owner of that car I would be taking your pictures to Graypaul and inviting them to pay for the first detail. Having paid, what, £140K I think you would have the right to expect perfection. My old red C2 was in much better condition than that on delivery. |
Wow you have done another great job :)
|
great job, great car...... I think I woud have done it for free....
go on, you took the car for a spin aswell didnt you !!! |
Originally Posted by darrens_here
(Post 7568636)
go on, you took the car for a spin aswell didnt you !!!
I would have tried it as well mind :lol1: G |
When summer comes, I will be asking the owner if he will take me for a wee run... never sat in a supercar at full chat, only very quick Scoobs and Evos, so will be nice to feel and hear the difference. Certainly starting the thing is enough to raise the hairs on your neck... :D
|
Wow, what an amazing job you have done! :eek:
|
These guys are pretty good with a bucket and sponge :norty: A majority of the Subaru members on here I am sure all aspire to be as good as these guys, well I do anyway.
:thumb: |
i'll 2nd that :thumb:
|
my god
|
| All times are GMT +1. The time now is 06:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands