interior light
 

Has anyone any ides why the interior light wont work when i open the drivers side door.I have swapped the door switches round and checked the wiring within the door everthing ok.All the other doors make the light come on but not the one i need.
cheers

It sounds like a broken wire to the drivers door switch.
You say you've checked the wiring in the door, the interior light switch is in the door frame not the door. I assume that's a typo though.
The door light switch should have 2 wires, one is earthed the other should have a voltage on it. This may be fed from the imobiliser/alarm circuit so don't mess to much.
There's always the chance that one channel of your alarm has failed as this operates the interior light on the wiring diagrams I've seen. Does your alarm detect an open drivers door?

John