MD321 owners in here please..
I thought it might be useful to get a thread for everyone who has one of these, I've got a 321T going on this weekend and can't wait :luxhello:
In here we can check what specs people are running and ask any questions of other owners If you have one can I suggest you please add your details as below.. eg Car - MY04 Sti Type UK MD Variant - 321T Supporting Power Mods - 2.5 Api conversion, forged pistons, Samco Turbo Inlet Hose, APS uppipe, Perrin EL Ceramic Coated Headers, PE 650 injectors, Miltek 3" TBE, APS Intercooler and DV. Max boost by what RPM - Max power by what RPM - Max torque by what RPM - Drivetrain Mods - Exedy Stage 1 Organic Clutch, standard gearbox. Other comments - Sound like a plan ? Pete |
How much did the 2.5 & turbo cost you?
|
The built engine was in the car when I got it, the turbo is £1250 I think..
Pete |
Bartop I have a similar spec to you, but running a 20g. I'd be interested in the graph to see when you start making boost. I make 1bar at 2800rpm and full boost at 3000rpm. Im considereing a MD321T, but need further info on like specced cars, before I commit
Andy |
Car - 1995 WRX
MD Variant - 321T Supporting Power Mods - Forged internals, 740cc's FMIC, FPR, ect ect . Max boost by what RPM - not sure Max power by what RPM - 5700 Max torque by what RPM - 4750 Drivetrain Mods - PPG 1-4 and 6 paddel flappy wappy clutch lol 419/400 at last rr session |
view my scooby
|
Car - MY00 UK
MD Variant - 321S Supporting Power Mods - 2.35, Hybrid Intercooler, Water/Meth Injection ect. Max boost by what RPM - 1.6Bar @ 3600 Max power by what RPM - 496 Hp Max torque by what RPM - 480 ftlb Drivetrain Mods - 6 Speed with DCCD + Twin plate On straight VPower - Race fuel map to come ;) |
Here's my 99 V5 type r limited spec,
MD Variant - 321T Supporting Power Mods - 2.5 Api conversion, forged pistons etc Max boost by what RPM - 1.8 bar @ 3200 Max power by what RPM - 432 bhp @6450 Max torque by what RPM -430 lb/ft Drivetrain Mods - Exedy Clutch, API rebuilt 6 speed gearbox. Other comments -Probably making more power now as it has been fitted by API with the Simtek ECU which has done away with the crappy MAF.:thumb: |
Car - V5 STI Type R
MD Variant - 321H Supporting Power Mods - Sti 8 IC, 550 nismo Injectors, SX fuel Reg, V Power Max boost by what RPM - 1.7Bar @ 3400 Aprox on mapping run up a hill Max power by what RPM - 396 Hp Max torque by what RPM - 360 ftlb Drivetrain Mods - Spec GT Clutch So on the flat it should be just over 400 |
Dazza - took the liberty of copying yours into the thread so it's easier to compare , hope that's ok. Thanks to everyone for the contributions so far !
Car - 2000 Impreza Turbo MD Variant - 321T Supporting Power Mods - 2.5 Short Motor, uprated pistons and rods, Autobahn Turbo Inlet Hoses,GT Spec Headers, 740 injectors, Revolution 3" Decat TBE, Autobahn 88 FMIC. Max boost by what RPM - Max power by what RPM - 461 Max torque by what RPM - 486 Drivetrain Mods - Exedy Twin Plate Clutch and Lightened Flywheel Other comments - |
Car - P1
MD Variant - 321T Supporting Power Mods - 2.5 conversion, forged pistons and Rods, Rodgerclark Big port cylinder heads with Supertech valves train , Samco Turbo Inlet Hose, Gruppe-S uppipe and headers, GFB pulleys,800 injectors, HKS fr mount ,Sx fuel regulator, Walbro pump , rodgerclark oil pump Apexi AVC-R boost controller Motec M800 ecu , Revolution 3" through system Max boost by what RPM - not enough Max power by what RPM - more than enough Max torque by what RPM -tooooo Much lol Drivetrain Mods - Hks twin plate paddle clutch and lighten flywheel, 6 speed Sti uk box, Rodgerclark carbon fibre Prop shaft |
2002 WRX - 2.0 built (soon) engine MD321T turbo
Am waiting for the car to be built again, then will hopefully get it on the rollers |
TD04 hybrid, so I'm almost 200bhp down on some of you guys !
I'm curious, the 6 speed bixes you are referring to - are they std STi boxes ? How much bhp can they cope with ? |
Car - MY02 Sti Type UK Prodrive
MD Variant - 321H Supporting Power Mods - Original un-molested engine and gearbox, Bosch 650 injectors, Walbro 255 fuel pump, Hayward & Scott 3" 100-cell sports cat exhaust, Hyperflow induction (in driver's side front wing), RCM group 7 catch can draining to sump, replica STI8 scoop (to original top-mount), Zen remap. Max boost by what RPM - 1.5 momentary, 1.4 constant from about 3200rpm up. Max power by what RPM - 390bhp at red line (7200rpm or so) Max torque by what RPM - 330lbft at about 4400rpm http://www.zen16541.zen.co.uk/sti_rr_26mar07.jpg Drivetrain Mods - AP Racing Organic clutch. Full boring details here. Other comments - Torque is low due to relatively low boost. I should be in to Zen week after next to have an HKS EVC6 boost controller fitted. It was due last month, but a dud clutch cleaned me out. I'm still aiming for 400/400. If the increased boost can't do it, then next up is headers and possible up-pipe changes. M |
Nice info guys - keep it coming :)
Just some tweaking required to mine and should be on the rollers end of next week :D |
bttt
hello you guys after some info re the 321h turbo
looking for 400bhp currently running vf35 turbo with pink injectors in a wrx bugeye question is is whats the max power on the pink injectors - will i have to upgrade them £££££££££ . |
What gear are you guys using for your max boost at rpm reading as there is a big difference between 3rd and 5th or 4th and 6th?
|
That is an awesome horsepower and torque figure for 1.6 bar of boost.
Originally Posted by little'un
(Post 7415326)
Car - MY00 UK
MD Variant - 321S Supporting Power Mods - 2.35, Hybrid Intercooler, Water/Meth Injection ect. Max boost by what RPM - 1.6Bar @ 3600 Max power by what RPM - 496 Hp Max torque by what RPM - 480 ftlb Drivetrain Mods - 6 Speed with DCCD + Twin plate On straight VPower - Race fuel map to come ;) |
Car - MY03 Sti Type UK
MD Variant - 321H Supporting Power Mods - Cold air intake, Samco tirbo inltet hose, PE 650 injectors, Custom 3" exhaust and sports cat, Zen tubular headers, Hyperflow uprated TMIC, OEM dump valve and standard internals, AVC-R boost controller. Mapped by Paul Blamire to give 1.6bar midrange tailing to 1.45 bar top end (V-Power plus a splash of NF). Drivetrain Mods - None, but extensive supension and brake upgrades No RR dyno run, but Deltadash road testing shows: Max boost by ~3900rpm Max power - 325 at wheels (a just pipping 400bhp at fly) at ~7000rpm Max torque ~360ft/lb at ~4600rpm Other comments - drives likes a dream; very tractable on the road. Considering running the 321H on a built 2.35 or 2.5 bottom end next year for more torque and even quicker spool. :norty: Anyone got any experience of this combo? |
Mine will be very similar to that except with the 321t
|
Dazza loving that spec
|
bttt
Originally Posted by GROWLER_GRRRR
(Post 7428887)
hello you guys after some info re the 321h turbo
looking for 400bhp currently running vf35 turbo with pink injectors in a wrx bugeye question is is whats the max power on the pink injectors - will i have to upgrade them £££££££££ . |
Pushing it to get 400 on the 550's imo unless you up the fuel pressure, better to get some 650's and be on the safe side I would say..
|
bttt
cheers kidda , iv emailed the master a forrest for the gen but no reply as yet ,
:thumb: |
Originally Posted by navydog21@hotmail.com
(Post 7430503)
Dazza loving that spec
Mr Bank Manager likes it as well :lol1: |
pinks are 565 aint they ?
probably still a bit small though , look for some 650s |
:thumb:
|
View mine <<<<<<
|
Originally Posted by Daveo
(Post 7429152)
That is an awesome horsepower and torque figure for 1.6 bar of boost.
I'd like to know what it would have made with it switched off :eek: |
had my 321h fitted by scoobyclinic just over a year ago got all the usual bits like tubuler wrapped headers,k+n typhoon 3in full decat exhaust system,hyperflow top mount.power came out at 383 bhp and that was with the standered injectors and running on optimax.have now got a new list parts which hopefully within the next couple of weeks should be at scoobyclinic being fitted and mapped. they include a aps fmic,water methanol injection,light weight engine pullys,samco turbo hose,700cc injectors,exedy twin plate clutch.hopefully when mapped should take me over the 400 mark.
|
All times are GMT +1. The time now is 01:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands