ARB front and back?
 

going to get whiteline arb for rear and solid droplinks to help cure understeer on my04 sti but what about the front as i have heard that it can dial the u/s back in again, any thoughts guys??

Hiya mate

Dont know the answer to your question but i'm about to get some whiteline bits for my scoob, same as yours, what rear arb are you going for, 22mm or 24mm?
Also where are you going to get yours from?

Cheers :)

i've got both 22mm adjustables on mine did the rear first and this will solve what your wanting on its own as when i put the front on i then had to put the rear on its hardest setting as such but if you want both i'd get adjustable 24mm rear and 22mm adjustable front both solid drop links

going for the 24mm adjustable

The trick is to raise the roll stiffnes front and back, but to increase the bias such that the rear is uprated to a higher degree.
Fit a 22mm front (single or double hole) and a 3 hole 24mm rear.

Set the front soft if a double hole and the rear soft too. Try it.
Move the rear to middle hole, try it.
Maximum stiffness is not always the best solution!

Have fun.

very helpful thanks 911