Phase 1 3 Port Boost Solenoid on a newage
 

Does anyone know what's required for fitting a phase 1 3 port boost solenoid to an 03 sti?

Thanks

From what I can see the top, heavy duty line is the supply from the the turbo, the side line is to the actuator and the bottom is for vent to air intake or atmosphere.

Could some one please confirm this.

wiring is colour like for like..

in your picture.. top is vent.. side is actuator.. bottom to compressor cover.

Simon :)

nice kitchen worktop btw ;) :D

Cheers, The sticker is the right way up the!!

My thinking was that the heavy duty ones would be the turbo and actuator.

I'll let the misses know you like her worktop:):)

double post

3 port solenoid plumbing.
 

To avoid confusion.
Attachment 60980

that is now correct ;)

when you fit it, make sure you don't retain the restrictor in the small pipe.

Will do, thanks for your help.

Allan

no problem

Another piccie, which shows the location of the restrictor...which you don't require on any post97 converting to a 3-port.

Attachment 60981

10 years later and still helpful, thanks lads.