They got a mention a while back (pre my01)
protects the leading edge behind the front wheel.
Any good?
How much?

CHEERS SCD Simon

If you mean the little flat sheet plastic ones, ScoobySport have them in stock:)

You can also get the sill guards from your dealer, although they are probably more expensive. They were originally intended just for the P1 18" wheels. Personally, I do think they make a difference.

Josh

Simon,
They are available for both MY94-00 and MY01 from Robinsonsons of Rochdale Subaru dealers. Tel 01706 716655.
They work very well and are only £10 per pair including VAT for both model types.

The pictures show the first style I developed for MY94-00, fitted to my car, and the production one is lent against the car sill.
They attach using the existing clips on MY94-00.

On MY01 you can remove the cente portion of the existing clips and screw a self tapper into the remaining portion of clip, not into the steel of the wing.
Or you could also try removing the centre portion of the original clip, and push fit a plastic rawl plug in into the middle of the remaining part of the clip.
The rawl plug will lock the original part of the clip to the car body, then screw the self tapper into the rawl plug. That way you don't damage the original clip.
You will probabaly have to file the rawl plugs to the required diameter to suit each clip position, to create the correct level of fit on MY01.

There is no drilling required on either model year.

http://upload.turbosport.co.uk/getpi...7713256145.jpg
http://upload.turbosport.co.uk/getpi...7713849982.jpg



Cheers MTR





[Edited by MTR - 12/31/2001 11:58:29 AM]

[Edited by MTR - 11/10/2002 5:13:34 PM]

MTR

I purchased a set from robinsons for my MY01

When you say use self tappers in the existing clips do you mean remove the centre then screw in the bit that remains?

had them several weeks now and been unable to suss out how to fix them

Phil

I just phoned KT Greens at Leeds for some, and they told me that they aren't allowed to sell me them. They can only order them when they order the equivalent wheels for a P1, and wouldn't sell me them cos I don't have a P1 anyway :(

Phil Stephens,
Yes that is correct. Or you could also try removing the centre portion of the original clip, and push fit a plastic rawl plug in into the middle of the remaining part of the clip.
The rawl plug will lock the original part of the clip to the car body, then screw the self tapper into the rawl plug. That way you don't damage the original clip.

Edited to add that you will probabaly have to file the rawl plugs to the required diameter to suit each clip position, to create the correct level of fit.
Don't start knocking eight bells out of your car wing with a hammer to get them to fit. :D

BuRR,
Buy some from Robinsons then.

Cheers MTR

[Edited by MTR - 12/31/2001 11:51:45 AM]

Thats New Years Day Job No.2 sorted

No.1 recovering from the night before

Thanks MTR

BuRR,

That's a load of rubbish, you should be able to buy them from any dealer and I know that Lavender Hill and Cheam Motors sell them for deffinate!!!!!

Failing that, get some of MTR's.....

Matt :)

P.S. The Prodrive ones are really worth it (£20 per pair) and make quite a difference to the amount of crap that gets sprayed up the side of the doors....MTR's ones are probably also just as good and are half the price.... :)

[Edited by mutant_matt - 12/31/2001 4:28:33 PM]

Thanks for the replies peeps,think i'll give robinsons or scoobysport a bell,can just about afford £10 & it will stop the bleedin stone chips!

CHEERS SCD Simon

got mine from MTR today!!

thanks Martin, hope you had a safe journey home. :)

Phil

Phil,
I just left the pub when the wife phoned, wanted to know if I was almost home!! She wasn't amused.
Then I got lost trying to find the motorway. DOH!
Did a 4 mile detour round Nottingham.

But got home safely, eventually.

Hope you like the mini mud flaps. Good price weren't they;)

Cheers MTR

[Edited by MTR - 1/1/2002 7:48:58 PM]

No offense MTR, but I think the Prodrive ones available through any Scoob dealership are better, being about an inch wider and deeper. Definitely keep crap off the doors and protect sills - very important if you've had them colour coded.

My dealer fitted them FOC during a normal service.

Richard.

Anyone have any pictures of these ? The ones in MRT's post dont show up :(
I think I can remember what they looked like just want to check :D

Pictures added to my original reply.

Cheers MTR

Thanks MTR, they were the ones I thought they were ;)