V4 Electric Speedo Cluster Wiring.
 

I'm trying to fit an electric speedo converter to a V4 STI Type R but can't find the wiring diagram. I need to find the speedo input signal wire, and the wire that sends the speed signal to the ECU.

Thanks

JDM V4 Harness: This is what the connector leads to on the gauge cluster
A1> BlU/WHT high beam indicator
A2> RED high beam indicator
A3> YEL door open, interior lights
A4> LTGRN ! symbol for parking brake
A5> RED/WHT CEL (now in red)
A6> BLK/WHT battery symbol/light
A7> BLK/BLU seat belt symbol/light
A8> GRN/WHT oil drip symbol/light
A9> BLU/RED open door warning/light
A10> WHT vehicle speed sensor 2
A11> GRN/BLK vehicle speed signal wire
A12> BLK vehicle speed sensor 2
A13> VIO illumination


B1> YEL/BLK clock
B2> GRN/WHT temp gauge
B3> BLK/RED temp gauge
B4> BLK ground
B5> -------
B6> BLK/GRN left turn indicator
B7> GRN/RED airbag symbol/light
B8> BLU/ORG open door warning indicator/light
B9> LTGRN/BLK right turn indicator
B10> GRN tach signal


C1> ORG/WHT illumination
C2> BRN/WHT fuel gauge
C3> RED/BLK low fuel warning light
C4> YEL/GRN hot "thing" warning light
C5> LTGRN/YEL ABS indicator/light
C6> BLU/YEL snow flake "HOLD" warning/indicator
C7> PNK ???
C8> WHT/BLK small lightbulb housing, with no transparent indicator
C9> YEL/RED I/C Spray indicator light
C10> BRN/RED small lightbulb housing, with no transparent indicator
C11> ------ small lightbulb housing, with no transparent indicator
C12> WHT/GRN temp gauge
C13> YEL/GRN clock


Ticky

Bumb

Hi is this diagram same in V5 / V6 Type-R STI clusters as well :rolleyes:
If no what´s the differences?
Thanx already

-S

Oh :sleep: of course the connectors are not the same because in V4 they are backside and V5 & V6 above the cluster :lol:

Anyway the V5/V6 diagram needed :thumb:

cheers

-Stobe

http://kbtv.info/fitting/SUBARU-IMPREZA-VER4.jpg
try that wiring