** Full set of 18" Rotas and Tyres for Sale **
 

THESE ARE NOW SOLD


thanks everyone for looking, knew they should go to a fellow SN'ter :D


I have for sale the following

4 x 18" Rota GRA (taramc II ) Alloys . These are 18 7.5, with a PCD of 5 x 100 and an offset of 48.
* Please note that 2 of them are badly kerbed, the other two have various marks and a bit of kerbing.
* I am selling them with the assumption that the buyer will want to refurb them and this is reflected in the price

Also I have 2 x Federals 225x35x18 Z Done about 60 miles !!
2 x Toyo T1-R 225x35x18 Z Done about 1000 miles

I will also chuck into the deal a pretty brand new Toyo Tyre (same as above) which has done about 300 miles, but has a tear in the tyre wall. You can see this tear in the supplied picture. Would need glueing.

All centre caps, valve caps intact and undamaged. Wheels and tyres have been cleaned and waxed.
I have supplied various pictures showing any damage, kerb marks etc, so the buyer knows what they getting and saves any questions afterwards.

The Price: New this whole lot would set you back £980 + but due to the need for a refurb, I am willing to let them go for £400 No offers please and buyer collects.

A sample few pics, more on request. Thanks for showing an interest. :)


http://img.photobucket.com/albums/09...h/DSCF0159.jpg

http://img.photobucket.com/albums/09...h/DSCF0165.jpg

http://img.photobucket.com/albums/09...h/DSCF0161.jpg

http://img.photobucket.com/albums/09...h/DSCF0160.jpg

cmon someone must want these :D

were abouts are you?

work in london, but home is in south bucks if that helps :thumb:

These need to go pretty quickly people..I dont want them cluttering up my nice messy garage :)

I dont want to sell on flebay if I can avoid, as I would rather some scoobynet owner got hold of them :)

Hi Swiss,
Do you know if theses will fit over Brembo's?

Cheers

Sherlock

there you go sir :D

http://rarerims.co.uk/alloys.php?pro...49f&startrow=0

if in doubt, call rarerims and speak to julian (where I got them from) and he can give you the definitive answer :D

How bad is the damage Tony on the two rims?

These came off a classic or newage mate? I'm guessing Classic?

Steve

Great quality wheels... I'll keep my ears open for you Chris.

Steve, yes they came off a classic.
see here what they looked like when on:
http://img.photobucket.com/albums/09...coobatdusk.jpg


The damage: well two have some pretty bad kerbing on them, I wont lie to you. When you look at the wheels from the side it dosent look bad, but upon closer inspection you will see that two have been scraped along a high kerb, hence the damage.
see here for a closer view
http://img.photobucket.com/albums/09...h/DSCF0167.jpg

Now someone could quite happily drive around on these all day with no problem like I did for ages, but I guessed that the buyer would want to make them look good, hence the reduction in price.


Simon..cheers mate :thumb:

well no-one biting, so on ebay they go..shame really :(

Tony,

from your link, what is a 'Claiper' :D

Shame about the 'no offers' matey ;)

I would make an offer :thumb:

cheeky sod :)

Unless you want to resort to Ebay Muppets :D

Did you run them on a classic over newage gold brembos mate? did they clear without spacers, if so I would be very interested.

They were run over standard subaru 4 pots...someone asked about brembo's and yes they will clear, but mine were not brembo's.

here is another pic of when they were on.
http://img.photobucket.com/albums/09...h/DSCF0178.jpg

*they are on ebay, but I can end the auction early if need be *

Hay Chris, whats going on, selling these babies. What are you replacing them with. PM me if you like.

darren, I have replaced with them with rota same style but in steel grey
just never posted up a pic because its a bit boring TBH
but as you insisted :D here they are:

http://img.photobucket.com/albums/09...h/DSCF0188.jpg

If im not mistaken they are 17". But they look great mate :)

Chris hope this helps with all the will they fit over Brembo's questions..

This is my new front set up... ;)

http://img.photobucket.com/albums/v1...o/brems002.jpg

http://img.photobucket.com/albums/v1...o/brems003.jpg

** Note these are my wheels in the pics not the one's for sale... demo picture for fitment query's **

It's sooooo tempting.

I don't know if I can do it this month with the baby due anyday now!!! Bugger why do things have to happen all at once.

BTT

Steve

steve, I know what you mean mate.....:D
mmmm new rims and tyres or nappies :wonder: ohh tough one :lol1:

They are on ebay and I have reduced the price

Your a tease Mr Tony. A tease I tell you. :norty:

But it is a very hard one to make a choice over. :wonder: :Whatever_

Steve
:thumb:

Even though I want someone to buy these, I would never suggest that you make the little one go wanting just because you wanted some new rims...






(what size wheels are on the pram :D )

Stop it. :hjtwofing

You will get me in trouble at this rate. :nono: :D

I beg you to stop..........(but it is still very tempting)

Steve
:thumb:

I am not saying anything more ....promise :thumb:


















http://img.photobucket.com/albums/09...eelantique.jpg

photoshopped effect :D

Do you know what the fitment is on an MY06? Need new wheels but I don't know what fits! Been too busy looking into interiors....

Just answered my own questions and I need 114.5 PCD :cry:

I bought Swiss's last 'spare' set of wheels/tyres and they were in fantastic condition :thumb:

Oh, and he's quite a nice chap too - I'll PM you payment details Mr. Swiss....;)