STI winglets and STI fog light covers.
 

I am after purchasing a pair of winglets and a pair of fog light covers for my 03 WRX.

Just wondered if they would fit ok, (are WRX bumpers same as STI's)??

Where is the best place to buy them?

And how easy are they to fit??

Thanks.

The best place to buy the winglets is from your local dealer there only 120 quid for the pair and they come ready painted.

I think the fog covers are cheap too and again ready painted.

As for fitting.....

I think the fog covers are just a push on fit.
The winglets take a little more work, It took me about 1 1/2 hors to fit mine.
and there is a couple of slits to cut if you have a WRX bumper but is easy enough.

If you do a search theres a couple of how to guides for this that also include part numbers required.

Cheers for the info.

Craig
Part numbers required shown below, check out this link which has a very good how to guide for the splitters. The prices were quoted to me at a local dealer about a month ago.
Mods
I have a brand new set of side splitters in silver not sure if I am going to fit them or not.
STI Fog Lamp Covers 57731FE300TG price £34.17 + vat STI Fog Lamp Covers 57731FE310TG price £34.17 + vat
(TG code for Silver)

Aero Trims LH 57742FE010TG Price £57.72 + vat
Aero Trims RH 57742FE000TG Price £57.72 + vat

Bolts X6 901000186
M6 captive nuts X6 901000186

Hope this helps.

Arch :)

Arch,
useful info there, didn't know that TG was the code for Silver, so I've updated the fitting guide.
Anyone know what the code for White is ?

Allan

Allan your mod site is very helpfull. Did you find that one cut out in the bumper was enough to secure the top edge as I have seen some done using three slots cut in bumper to locate all three clips on the splitter.

Hi all i fitted some corner splitters on mine today and cut all three slots for the tabs to fit in and it give a really nice fit.Only takes a couple of hours and looks the business.

Fit is perfect, and I'm very fussy.

The only reason I chose to go with one, is that getting the position and size of the slots is critical. If you get it wrong you will see it.

Allan

I cut all three slots when I did mine and they fitted perfectly...