|
Front plate that tilts when moving?
Remember seeing a thread on here years ago. Can't find it using search. Who can help me find it or give some guidance on where the above can be tracked down / bought. I like the idea of a front plate that tilts from vertical to horizontal when moving as it (a) helps out with front facing speed cameras ;) (b) IMHO will look great!
TX. |
It's also illegal !!
|
Massive Benefit, where do we sign for me these? I would buy one without a doubt
|
Can you get a rear too? :p
|
Originally Posted by marmski
(Post 6665811)
Can you get a rear too? :p
|
Used to have a plate on hinges on my mini, used to fold up when doing over about 30 and then drop back when slowing down.
|
Originally Posted by J_sca001
(Post 6665880)
You certainly would get it up the rear when your serving time for Perverting the Course of Justice!:lol1: :lol1:
|
Originally Posted by J_sca001
(Post 6665880)
You certainly would get it up the rear when your serving time for Perverting the Course of Justice!:lol1: :lol1:
|
That's it! Where did you get it fella?
TX.
Originally Posted by Mangel
(Post 6665893)
Used to have a plate on hinges on my mini, used to fold up when doing over about 30 and then drop back when slowing down.
|
J.
You seem to know a bit about the law ;) why can't you have one of these on the road? TX. PS You tracked down the WR1 style grille yet, we're on a group buy remember!
Originally Posted by J_sca001
(Post 6665880)
You certainly would get it up the rear when your serving time for Perverting the Course of Justice!:lol1: :lol1:
|
Unfortunely due to the sad states of affairs in this country more likely to get jailed for a motoring related incident than a being a pedo or a rapist !!
Seen a few Miata's in the states with folding no plates - Have a look here should give few ideas on how to make one ! Team Miata - Aftermarket Accessories for your Miata and look at liscence bracket Richard |
They're pretty easy to make yourself with inexpensive bits of hardware from B & Q etc.
Made one for my old scooby a few years ago! :thumb: Dave :cool: |
does anyone know where to get the hyrdaulic ones for the rear plate for er show use
|
How about one of these? (car not included) :)
http://sturtevant.com/reed/db5-007b.jpg |
Originally Posted by Robocop
(Post 6666415)
How about one of these? (car not included) :)
http://sturtevant.com/reed/db5-007b.jpg |
Can you make one for me Dave, please?!!! I'm no good at DIY :(
TX.
Originally Posted by DAVE-W
(Post 6666066)
They're pretty easy to make yourself with inexpensive bits of hardware from B & Q etc.
Made one for my old scooby a few years ago! :thumb: Dave :cool: |
Get some light aero board.........
then get one those regs made from a printed sticker... then get bit fishing rod line... couple little holes and mount it bottom bumper or original place....... wind will blow it up....... p.s. not sure if aero board is material i'm thinking off....... |
> p.s. not sure if aero board is material i'm thinking off.......
Correx I think. The plastic corrugated material. Easily available from the midnight garage, estate agents post big sheets of it outside various houses around you just stapled to wooden posts, feel free to help yourself. |
Seen these on MLR - the boy is a trader on the MLR from the US and exports to this country.Hope this helps.There is a video of it in action on his website.
Rexpeed |
Originally Posted by bmac800
(Post 6667507)
Seen these on MLR - the boy is a trader on the MLR from the US and exports to this country.Hope this helps.There is a video of it in action on his website.
Rexpeed Warning: For off-road use only! |
WTF! Why is this now sitting within Members Gallary :mad: Are the mods drinking jungle juice?
TX. |
| All times are GMT +1. The time now is 06:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands