ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Trader Announcements (https://www.scoobynet.com/trader-announcements-363/)
-   -   Revolution Carbon Interior Trim Kit Impreza 05 onwards (https://www.scoobynet.com/trader-announcements-363/579472-revolution-carbon-interior-trim-kit-impreza-05-onwards.html)

REVOLUTION 01 February 2007 12:53 PM

Revolution Carbon Interior Trim Kit Impreza 05 onwards
 
Hi Everyone

Here's another exclusive from Revolution................

After many requests for true carbon dash kits for Imprezas we've been hard at it over the winter and have developed this amazing piece of kit.

We've had made for us a Carbon Fibre interior trim kit for the Subaru Impreza '05 onwards Blobeye and '06 onwards Hawkeye.
These cover STi and WRX models and in Right Hand Drive Only (left hand available special order).
We are working on Classic & Bugeye and Blobeye early models.

The kit is a 14-Piece kit with 3M backing and "REAL" Carbon Fibre weave manufactured in the USA (not China) from the same Company who supplies Porsche and Audi North America........in short it's pukka stuff.

2 x Airvent rings
1 x Drivers door switch surround
1 x Passenger door switch surround
1 x Rear n/s door switch surround
1 x Rear o/s door switch surround
1 x Top center heater vent surrounds
1 x Center console heater control pannel
1 x Single din pannel if single dine head unit is fitted
1 x Ash tray cover
1 x Gear gaitor surround panel
1 x Water spray and fog switch surround
2 x Blanks for above switches

The pictures dont really do the kit justice, as i found its very hard to get a good picture of carbon fibre products wihout the help of a photo studio.....

http://i45.photobucket.com/albums/f6...k/CIMG5641.jpg

http://i45.photobucket.com/albums/f6...euk/dash-9.jpg

http://i45.photobucket.com/albums/f6...euk/dash-8.jpg

http://i45.photobucket.com/albums/f6...euk/dash-7.jpg

http://i45.photobucket.com/albums/f6...euk/dash-4.jpg

http://i45.photobucket.com/albums/f6...euk/dash-3.jpg

http://i45.photobucket.com/albums/f6...euk/dash-2.jpg

http://i45.photobucket.com/albums/f6...uk/dash-13.jpg

http://i45.photobucket.com/albums/f6...uk/dash-12.jpg

http://i45.photobucket.com/albums/f6...uk/dash-11.jpg

http://i45.photobucket.com/albums/f6...uk/dash-10.jpg

http://i45.photobucket.com/albums/f6...euk/dash-1.jpg

http://i45.photobucket.com/albums/f6...euk/dash-6.jpg

http://i45.photobucket.com/albums/f6...euk/dash-5.jpg

Please note the 1st kits we supplied with the heater rings to go on the outside of the bezzle and stick to the dash - apparently the yanks prefer it this way. We made a small cut on ours and made it slightly smaller to suit the actual vent itself (very simple to do) and in our opinion it looks better. The first 2 kits will be like this although in the future they will come re-sized to fit the vent as we prefer it this way.

We have had the kit on our car for nearly 3 months now. We wanted to use it for a while to keep an eye on any wear or peeling etc which could have occured but i can honestly say its spot on without problems. The first 7 kits flew out the door over the counter and we're doing this offer on the last 2 before we re order again.

Normall RRP £299.99

After our initial order of 10, we have 2 kits left at only available at £249.99

There could be an option to do a group buy, so if you could give me some feedback i will gauge interest and go from there.

Thanks

Colin@revolution

0191 4770785

Revolution

kaa273 01 February 2007 04:50 PM

looks good how about a kit for classics :notworthy

REVOLUTION 01 February 2007 05:20 PM


Originally Posted by kaa273 (Post 6615000)
looks good how about a kit for classics :notworthy

All in good time

They are in the process of being sorted now

P.M me your contact details and i can let you know when they become available.

Thanks

Colin@revolution

leerichosti 05 February 2007 07:37 PM

richo's gonna get ya :lol1: :lol1: :lol1: :hjtwofing

swampster 06 February 2007 12:31 AM

Other colours might be nice too, like metallics.. Aluminium, Graphite etc
Seen a company (prewoodc.de - German site) that makes similar (not as complete) stuff based in Germany, though not seen it for sale in the UK.

REVOLUTION 06 February 2007 09:38 AM


Originally Posted by swampster (Post 6628619)
Other colours might be nice too, like metallics.. Aluminium, Graphite etc
Seen a company (prewoodc.de - German site) that makes similar (not as complete) stuff based in Germany, though not seen it for sale in the UK.

Hi

We can supply the various finishes such as wood, brushed ali ans loads of colors etc.

Get these in quantites so thought carbon would be the best, but please get in touch if you have a different finish in mind

Colin@revolution

0191 4770785

The Chief 06 February 2007 02:02 PM

Very very nice indeed - unfortunately i dont own a new age:(

REVOLUTION 06 February 2007 02:42 PM


Originally Posted by The Chief (Post 6630206)
Very very nice indeed - unfortunately i dont own a new age:(

That would be a bit of a disadvantage at the moment lol

BUT !!!

P.M me your details of car etc as we have classic and bugeye in the pipeline at the moment

Regards

Colin@revolution

0191 4770785

Revolution

swampster 06 February 2007 07:28 PM

I'd be sorely tempted at some of this stuff in a few months time probably, when the bank balance gets over the shock of forking out for the car, the insurance, the AA cover and a new head unit :)

Which is probably just as well, seeing as the stuff for the classic isn't available yet, when it is and if there's metallic options then this stuff looks better than an interior paint job! How easy is it to fit? being all fingers and thumbs I'd probably make a complete bodge job of it if it's fiddly & sticky.. lol

gillyz20let 17 February 2007 07:08 PM

looks a mess.

ethanrob 18 February 2007 09:28 AM

must agree TBH,it looks cheap


sorry !

mark

kaa273 18 February 2007 05:53 PM

I'd love some completely carbon dash parts :D

REVOLUTION 07 August 2007 05:38 PM

Last carbon dash kit left!!!!
 

Originally Posted by REVOLUTION (Post 6614099)
Hi Everyone

Here's another exclusive from Revolution................

After many requests for true carbon dash kits for Imprezas we've been hard at it over the winter and have developed this amazing piece of kit.

We've had made for us a Carbon Fibre interior trim kit for the Subaru Impreza '05 onwards Blobeye and '06 onwards Hawkeye.
These cover STi and WRX models and in Right Hand Drive Only (left hand available special order).
We are working on Classic & Bugeye and Blobeye early models.

The kit is a 14-Piece kit with 3M backing and "REAL" Carbon Fibre weave manufactured in the USA (not China) from the same Company who supplies Porsche and Audi North America........in short it's pukka stuff.

2 x Airvent rings
1 x Drivers door switch surround
1 x Passenger door switch surround
1 x Rear n/s door switch surround
1 x Rear o/s door switch surround
1 x Top center heater vent surrounds
1 x Center console heater control pannel
1 x Single din pannel if single dine head unit is fitted
1 x Ash tray cover
1 x Gear gaitor surround panel
1 x Water spray and fog switch surround
2 x Blanks for above switches

The pictures dont really do the kit justice, as i found its very hard to get a good picture of carbon fibre products wihout the help of a photo studio.....

http://i45.photobucket.com/albums/f6...k/CIMG5641.jpg

http://i45.photobucket.com/albums/f6...euk/dash-9.jpg

http://i45.photobucket.com/albums/f6...euk/dash-8.jpg

http://i45.photobucket.com/albums/f6...euk/dash-7.jpg

http://i45.photobucket.com/albums/f6...euk/dash-4.jpg

http://i45.photobucket.com/albums/f6...euk/dash-3.jpg

http://i45.photobucket.com/albums/f6...euk/dash-2.jpg

http://i45.photobucket.com/albums/f6...uk/dash-13.jpg

http://i45.photobucket.com/albums/f6...uk/dash-12.jpg

http://i45.photobucket.com/albums/f6...uk/dash-11.jpg

http://i45.photobucket.com/albums/f6...uk/dash-10.jpg

http://i45.photobucket.com/albums/f6...euk/dash-1.jpg

http://i45.photobucket.com/albums/f6...euk/dash-6.jpg

http://i45.photobucket.com/albums/f6...euk/dash-5.jpg

Please note the 1st kits we supplied with the heater rings to go on the outside of the bezzle and stick to the dash - apparently the yanks prefer it this way. We made a small cut on ours and made it slightly smaller to suit the actual vent itself (very simple to do) and in our opinion it looks better. The first 2 kits will be like this although in the future they will come re-sized to fit the vent as we prefer it this way.

We have had the kit on our car for nearly 3 months now. We wanted to use it for a while to keep an eye on any wear or peeling etc which could have occured but i can honestly say its spot on without problems. The first 7 kits flew out the door over the counter and we're doing this offer on the last 2 before we re order again.

Normall RRP £299.99

After our initial order of 10, we have 2 kits left at only available at £249.99

There could be an option to do a group buy, so if you could give me some feedback i will gauge interest and go from there.

Thanks

Colin@revolution

0191 4770785

Revolution



Hi Everyone

Last 1 left of these kits at a knockdown price of £199.99!!!!

Contact me if interested

Keith

Revolution

moffett 26 September 2007 02:24 PM

I will take a one for a bugeye whenever they are available

WRXshaneWRX 26 September 2007 04:39 PM

id buy a kit for a prefacelift classic if your doing them soon

feRRetboy 27 September 2007 04:37 PM

is this the same Kit that was fitted to the silver hawkeye STI that was in Japanese performance magazine?

REVOLUTION 03 October 2007 02:54 PM


Originally Posted by feRRetboy (Post 7286469)
is this the same Kit that was fitted to the silver hawkeye STI that was in Japanese performance magazine?


Hi

Yes, this is the same kit as fitted to our demo STi in Japanese Performance.
We have more stock of these due in a week or two.

Thanks

Keith

j_81 27 July 2010 04:02 PM

Was looking for this kind of kit for a classic, were they ever made?

REVOLUTION 31 July 2010 09:34 AM

Hi

Sorry, just spotted this thread, unfortunately this is something that was never done for the classic Impreza. To be honest we do not do them for the Hawkeye anymore. Demand was not high enough.

Thanks

Keith


All times are GMT +1. The time now is 11:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands