Re-badging MY05 STi Type UK..Pics Please
 

Please could someone post some 'square on' shots with a datum point of all the standard badging on their STi, with measurements if possible.

Boot:
WRX Impreza
STi Type UK

Doors:
STi Subaru Technical International.

Previous owner has debadged all STi bits, even took front grill out...
Dealer has ordered them for me.

Thanks
M

does the dealer have a 05 in stock? if so park side by side and take your time.

Nice idea Dave, but no he hasnt...

http://img.photobucket.com/albums/v2...boy/badges.jpg

The "A" is actually 44mm, so just let it overhang by 2mm each side. I used a length of white cotton stretched between the bottom corners of the clear part of the lights and then measured a centre, then marked it out as above. Before placing the letters I then taped a 2' steel rule under using the cotton guide line to rest each letter on and ensure perfect alignment.

HTH

Corrado Boy...

thanks for that...but it was the following!

Boot:
WRX Impreza
STi Type UK

Doors:
STi Subaru Technical International.

Only badges he hasn't taken off is boot Subaru and Grill badge

Thanks again
M

Doh!

Found these.. hope it helps..

The 'Type UK' badge sits about 5mm under the STi badge on the boot below:

https://www.scoobynet.com/images/sna...test/spec3.jpg

You can just about make out the 'STi Subaru Technia International' sticker on the door... hopefully well enough to position yours anyways.

https://www.scoobynet.com/images/sna...test/spec2.jpg

(Sorry to post this... if it is your car - think it is Webmaster's car)

Good luck!

Cheers..!!

Dealer may want a go... not to sure... he reckons the backing is lined up so easy to fit...

Yeah I'm sure the backing is shaped to fill the boot edge. Not cheap though to replace. I had to fit the SUBARU too which comes on a backing sheet correctly spaced. I went to a dealer, took some photos and measurements and used masking tape to get alignment.

hopefully this pic will help you get some ref points
http://img.photobucket.com/albums/v2...Picture521.jpg

The STI badge has a boot alignment backing and the door stickers have a notch in the backing so that you can line them up with the front of the door. I know this because I had to do the same thing on wednesday! I assume the other badges are the same.

I was gonna say take a picture of mine tonight matey at the carbrook meet,but it will be dark,so i will shut up :freak3:

mark

Thanks to all who helped with this..

Notes:
STi badge came with a template that lines up with boot lid..
Type UK didn't...and alignment is a bit random on the cars I have been shown/googled, maybe have been fitted at dealers/UK importers???
http://home.freeuk.com/wrx/sti/stibootsm.jpg
http://home.freeuk.com/wrx/sti/typeuksm.JPG

Door stickers are off Ebay, top quality...are handed for each side...the press cars I have seen on google images dont seem to be handed (ie STi at left on RH door and left on RH door??)
Genuine ones are coming
http://home.freeuk.com/wrx/sti/stiside.JPG

WRX, Impreza badges have not come yet...dont know whether to Refit???

STi badge for grill on way.... Back to standard soon!

Dealer gave me 2 extra STi fog lamp cover stickers...put one on the scoop....
http://home.freeuk.com/wrx/sti/stibonnetsm.JPG


Again...thanks
Mark

Looks nice mate. Good work.

I bet that one on the scoop starts to bug u soon though ;)