TMIC ADVICE!
Thinking about fitting a bigger TMIC and some sort of induction kit to my my99 uk turbo. Would i have to have a remap after or is it just a case of fitting them? Any advice would be much appreciated..........:confused:
|
Yes you should get a remap to take full advantage of the new items.
|
If you want to benefit from these mods then yes you'll need a remap but you can run the car without.
I ran with an induction kit for a year before having a remap. I then ran for 4 months with FMIC before it was remapped again. And Had no problems. but unless your going for a FMIC instead of TMIC I'd stick with the standard air box and stick in a decent panal filter. MY99/00 car's love to eat maf's and an induction kit seems to speed up the process. There was an interesting review of interecoolers in Jap Performance a couple of months back, a Cheap Ebay topmount was worse than the standard one!!! The core of the intercooler wasn't very dense inside. If I was upgrading my TMIC, I'd be looking at an STI5/6, Fits streight on and is good for 330 or an STI8 which is good for 400BHP but you need to mess around to get this on. |
THIS MAY HELP
Good write up and fitting guide for the sti 7/8 top mount https://www.scoobynet.com/projects-4...0-classic.html Or we got a group buy going on front mounts depending on how far you want to go with your tune :D KIPS |
I used the above to fit my STI8 cooler.
Wasn't too hard. Bit of a shock when you first offer it up against the standard IC. |
As danny said dont fit an induction kit unless you have to more trouble than its worth:nono:
|
All times are GMT +1. The time now is 07:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands