ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Non Scooby Related (https://www.scoobynet.com/non-scooby-related-4/)
-   -   Sheds (https://www.scoobynet.com/non-scooby-related-4/552317-sheds.html)

Chrisgr31 19 October 2006 11:45 AM

Sheds
 
I am in the process of getting a new shed. Or to be precise the Insurance Company are getting me a new shed, after the last one burnt down.

Anyway been offered a choice of two. One has 12mm cladding pressure treated. One has 20mm cladding not treated. Identical other than this cladding. Which is best?

DCI Gene Hunt 19 October 2006 11:46 AM

Pressure treated...... will not rot (as quickly) :)

OllyK 19 October 2006 12:08 PM

I'd go for the 20mm to get the strength then slap about 3 coats of wood preserver on it!

r32 19 October 2006 12:10 PM

Pressure treated ......... pity they dont do a 20mm pressure treated though.
How did the old one catch fire?

Chrisgr31 19 October 2006 12:11 PM


Originally Posted by OllyK
I'd go for the 20mm to get the strength then slap about 3 coats of wood preserver on it!


That was my thoughts, but then the consensus in the opffice was to go for the thinner one which is pressure treated.

OllyK 19 October 2006 01:14 PM


Originally Posted by Chrisgr31
That was my thoughts, but then the consensus in the opffice was to go for the thinner one which is pressure treated.

Depends what is more important to you. If you want higher security and don't mind wood preserving now and every couple of years there after, go for the thicker one, it will last just fine if you maintain it well. I did this with my old one and it was still like new 10 years on when we moved house. If you don't think you'll find the time to maintain it, then go pressure treated, but then it still wouldn't hurt to slap some wood preserver on now and again.

Chrisgr31 19 October 2006 01:42 PM


Originally Posted by r32
Pressure treated ......... pity they dont do a 20mm pressure treated though.
How did the old one catch fire?

They probably do, but not sure the insurance company will pay for it!

How it caught fire is a matter of some debate. Next doors garden caught fire, either through sun glinting through a piece of glass (at 9pm in June?!) or an electical fault in their pond filtration equipment.

That in turn set fire to the fence and our shed.

An intersing point is that our insurance does not cover us for plants that are damaged, not a real problem to us, as the plants involved were limited in number. Another neighbour though lost a fully mature Silver Birch in the fire, which cost £900 to remove. His insurance (fortunately for him) covered plants. We would have had to pay that bill ourselves.

Also in the case of a fire you can't calim off the person in who's garden it started unless you can prove they were negligent.

Bubba po 19 October 2006 09:22 PM

Mmmmmm.... She-e-e-e-edssss. :luvlove:

I too would go for the 20mm cladding and use a good quality preservative, not a paint or stain. Cuprinol do a good one.http://www.duluxdecoratorcentre.co.u...0202&langId=-1 I would do the underside of the floor before putting it together, and mount the bearers on pads of slate so that it isn't in contact with the floor. Damp is the death of sheds. Sort the roof (the supplied felt is always ****e) and the floor (not in contact with the ground) and the walls will last for feckin' ages even without preservative. :)

My twopenn'orth. :)

Shark Man 19 October 2006 09:31 PM

Mines only 12mm pressure treated :(

Still, only the one side is exposed to the elements and it weathering nicely, apart from the knots falling out :mad:

Concrete/slab base, perspex roof and proper guttering is the way to go :thumb:

Bubba po 19 October 2006 09:32 PM


Originally Posted by Shark Man
Mines only 12mm pressure treated :(

Still, only the one side is exposed to the elements and it weathering nicely, apart from the knots falling out :mad:

Concrete/slab base, perspex roof and proper guttering is the way to go :thumb:

12 mil? You could poke your finger through that!

Cheapskate. :mad:

Shark Man 19 October 2006 09:34 PM

I know :( but it's right against a fence so it doesn't see the elements, quite cosy in there after I bubble wrapped the roof :)

Bubba po 19 October 2006 09:40 PM

Is it ship-lap, or v-groove t&G? :)

richieh 19 October 2006 09:43 PM


Originally Posted by Bubba po
12 mil? You could poke your finger through that!

Cheapskate. :mad:

ahh but the 12mm will destoy the 20 in the twisties-i thought everyone knew that:confused:
they'll be posting polls to vote on next-is my shed a shed kind of thing
richie:D

Shark Man 19 October 2006 09:44 PM

Shiplap :o

Bubba po 19 October 2006 09:46 PM

Anyroad, Chrisgr31 (catchy handle) would you consider adding your shed to this cavalcade of seductive outbuildings when you have it erected? :)

Bubba po 19 October 2006 09:47 PM


Originally Posted by Shark Man
Shiplap :o

So it's actually somewhere between 5 mil and 12 mil for a third of the width of the board? :cry:

casualhero 19 October 2006 09:48 PM

You'll be saying my wiggly tin favela isn't good enough next, you heartless ogres :cry:

Fuzz 19 October 2006 09:51 PM

20mm and preserve it well before knocking it up.. ooh err


Andy

richieh 19 October 2006 09:52 PM


Originally Posted by Bubba po
Anyroad, Chrisgr31 (catchy handle) would you consider adding your shed to this collection of mini shanty towns when you have it erected? :)

sorry couldnt help it:lol1:
richie

Shark Man 19 October 2006 09:53 PM


Originally Posted by Bubba po
So it's actually somewhere between 5 mil and 12 mil for a third of the width of the board? :cry:


Err, something like that.

But the other side is a old fashioned 8" thick claybrick wall with single cavity and a dampcourse :D

Bubba po 19 October 2006 09:53 PM


Originally Posted by richieh
sorry couldnt help it:lol1:
richie

My shed looks much better than that, these days.:mad:

Besides, I'm getting a new, better one... ask Shark man. http://undercovered.co.uk/guestbook1...miles/smug.gif

Bubba po 19 October 2006 09:56 PM


Originally Posted by casualhero
You'll be saying my wiggly tin favela isn't good enough next, you heartless ogres :cry:

Surely Sheds have to be wood? :confused:

richieh 19 October 2006 09:57 PM


Originally Posted by Bubba po
My shed looks much better than that, these days.:mad:

Besides, I'm getting a new, better one... ask Shark man. :smug:

shed and looking good?-some kind of oxymoron shirley(sic)
richie:D

casualhero 19 October 2006 10:02 PM


Originally Posted by Bubba po
Surely Sheds have to be wood? :confused:

You say shed, I say favela (it's themic see? Brazilian GP this weekend :thumb: )

Anyway, I've seen Shed Seven and they were made out of Yorkshiremen :razz:

Bubba po 19 October 2006 10:07 PM


Originally Posted by casualhero

Anyway, I've seen Shed Seven and they were made out of Yorkshiremen :razz:

But they only play when they bloody well feel like it. :D

Son of Quatto 19 October 2006 10:09 PM

Go back Bubbagek u are not welcome here :razz:

Chrisgr31 20 October 2006 12:05 PM


Originally Posted by Bubba po
Anyroad, Chrisgr31 (catchy handle) would you consider adding your shed to this cavalcade of seductive outbuildings when you have it erected? :)

Perhaps I should post a pic of it after the fire!

Coffin Dodger 20 October 2006 03:45 PM

A man's shed is his true castle. It's a right of passage into midlife when you own your first shed :)

Shark Man 20 October 2006 04:54 PM

Mid life at 27 :thumb: :o

I've started keeping the Fushias in there over winter with the pots nestling happily in the bores of a defunct Rover V8 :D

RussBoy 20 October 2006 05:35 PM

Might be SIAL but WTF.... Readersheds.co.uk - share your shed - pictures of other peoples sheds, downloand shed plans, Directory of shed companies, garden shed on the interweb


Russ


All times are GMT +1. The time now is 08:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands