ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   missing restrictor in the boost pipework (https://www.scoobynet.com/general-technical-10/550248-missing-restrictor-in-the-boost-pipework.html)

KIPS 10 October 2006 11:54 PM

missing restrictor in the boost pipework
 
has anyone got one to replace mine its a 1994 wrx import with the three port solonoid or can i get something to replace
any ideas if i got to replace the whole pipe or just the missing restictor
cheers kip

stockcar 11 October 2006 08:04 AM

you won't have one in the turbo nose or actuator pipe work anyhow..............................

2port solenoids have them just before the t-piece from the tubo nose

alyn

Jolly Green Monster 11 October 2006 10:55 AM

it is in the vent pipe between the 3port bottom hose and the air intake..

You only need the restrictor..

I might have one spare.. will check

Simon

Scott.T 11 October 2006 01:38 PM

Subaru Part numbers :

22326AA090 (Standard Pre96)
22326KA120 (Standard Post96)

About £2 I think.

But a piece of brass/ally or plastic with a 2mm hole should suffice. If it still overboosts reduce the size of the hole (Pre96) or increase the size of the hole (post96).


All times are GMT +1. The time now is 06:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands