McGard locking wheel nuts for Classic???
 

Hi

Can anyone tell me if the following spec. would be the correct McGard locking wheel nuts for the Classics (specifically, my car is a MY93 WRX, GC8A48D)...

'24154S' - M12 x 1.25

...I know that McGard also do 'Tuner' versions for narrow bolt holes on modern-day alloys. I'm going to purchase some brand new 17s soon... Would I require this narrow 'Tuner' style nut, or will normal suffice?...

Any advice is much appreciated.

Thank you

John

Depends on the type of wheels you're going to get and what diameter the holes are.

Subaru dealers will do you a set of McGards as standard now.

Normal part no 24152 and 25254 for slim 'tuner' version

mmm i need some locking nuts aswell! i have aftermarket alloys so i would probably need the tuner ones then? what price are they?
ian

McGards are usually £25~30 mark

for that price they make a worthwile investment so do the tuner ones fit most aftermarket alloys? i have a set of inovit's on my wrx:) will i be be able to get some at halfords or somewhere like so i can try before i buy?

Tuner versions will probably fit 99% of all wheels due to their smaller diameter.
I think you can get them from Halfrauds, they're Thatchem approved and one of the best you can get.

http://www.mcgard.com/automotive/

ok cheers richichie will go take a look
ian

I have a set I could sell. Only used for 3 months. £15 plus P+P. PM me if interested.

Hi mate. I had the gun-metal 17" Inovite Tarmac 10-spokes (original P1 wheel) fitted to my previous FTO and the 'Tuner' style nuts were indeed the ones to use for that wheel's stud holes. The product codes are:

M12 x 1.25 (SILVER)... '25254'
M12 x 1.25 (BLACK).... '25354'


Try eBay first - you might find them on there at a slightly reduced price, but bank on spending between £25-£35, regardless...

Hi mate

Are they definately...

M12 x 1.25 (SILVER COLOUR)... '25254' ?

If so, I'll have 'em.

Please reply with advice, etc...

Thanks
John

P.S. I've sent this response to you as a PM aswell...