Fitting Sigma M30 ECU...
 

... is it a DIY or do i need to get the dealer to do it.

if its diy where do i look for it and is it just plug and play?

Thanks

Ricey

As you may or not be aware the Sigma M30 is a Thatcham Category 1 approved alarm and immobiliser, intended for professional fitment only therefore the installation information is a confidential document of a security sensitive nature, that should only be provided to trained, authorised dealers.
This is the reason that the wiring information is not supplied with the systems.

I would be very dissapointed if anyone were to provide you with the wiring information, thus making it generally available in the public domain, as this jeopardizes the security of all similar installed systems. Anyone releasing this information clearly does not have a genuine interest in vehicle security.

In addition to this, Category 1 systems incorporate at least 2 engine immobilisation circuits. As well as being potentially hazardous if the system is not installed correctly, all security systems are only as effective as the installation and poor adjustment gives products a bad name.

My advice would be to contact your local Subaru/Sigma dealer with regard to fitting the system and setting it up for you correctly.
Dealers, however, will understandably be reluctant to fit a system from an unknown source (due to later problems with your supplied system, warranty claims etc on what they may consider to be a second hand product).

Mike.

Cheers Mikey, I'll just get the dealers to fit then. part was order from them anyway.
Thanks
RR