Blitz Gauge Instalation Help
 

Can anyone Help?

I Have a set of 3 Blitz DC II Gauges with Live unit II (new), but have no wiring or instalation Diagram. I have all the wires i need with the set to fit them, i just need to know where to connect the wires into the impreza main harness.
I'm fitting them to a 2004 STi jdm.

If anyone can advise me i would be much appreciate it.

Thanks in advance , Stu

which gauges do you have (oil, temp etc..?)

do you have the senders as well?

Hi, I have boost, oil temp and oil pressure and these fit straight into the live unit. I have a bunch of wires from the live unit with the appropiatewire harnes extentions
Thanks

ok but you will need senders to get the signals in the first place, if I remember correctly from mine

http://www.alamomotorsports.com/blit...DCLiveUnit.jpg

http://premium1.uploadit.org/willgill//loc.JPG
the far left tube is the turbo tube, so you need to insert a T piece into hose that I have marked in yellow, the other two arrows show the locations of placed you can place temp and pressure senders, as far as I know you cant tap into the existing ones, but hey dont quote me on that.

To get to the front one its easiest to remove the alternator, and for the rear sensor you need a large allen key and I'd reccomend removing at least the TMIC.

Thanks Mate, I was told i had everything i needed to fit these gauges to the car as they have already cost just under £1000.
Did you have any fitting instructions with your Gauges or wiring diagrams ??
sounds like this is gonna be a nightmare, Maybe i should just put them up sale .. lol

Does anyone know where i can get replacment sensors for these gauges? and a diagram to show what wires do what on the live unit ??
thanks