Fitting Oil gauges.. what do i need??
got my self some nice oil press and oil temp gauges.. but what else do i need to get them fitted?? its for a 04wrx....
many thanks kevin |
:wonder:
|
oil pressure, temp senders, and it then depends on where you are going to put the senders?
you can fit a t peice under the alternator and use the same plug as the std oil pressure switch, there is also a blanking plug for the oil galleries on top of cyl 3, it's common practice to put oil temp sender in there but you will need an adaptor, not sure of size? or, you can get a sandwich plate that goes between the oil filter and the engine and put them both on that the choice is yours :wonder: |
Originally Posted by scoobysmiff
oil pressure, temp senders, and it then depends on where you are going to put the senders?
you can fit a t peice under the alternator and use the same plug as the std oil pressure switch, there is also a blanking plug for the oil galleries on top of cyl 3, it's common practice to put oil temp sender in there but you will need an adaptor, not sure of size? or, you can get a sandwich plate that goes between the oil filter and the engine and put them both on that the choice is yours :wonder: |
i got mine when i got my gauges from the autogauge group buy on here at the end of last year, it wasn't that expensive either
nick@gaugeplace.co.uk Email Nick and see what he can do them for |
All times are GMT +1. The time now is 03:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands