Hayward and Scott GB
 

I have been on to Hayward and Scott about starting a GB and they have given me the thumbs up.
Based on at least 10 people they will do a
decat down pipe for classic @ £135 + vat and delivary


If you want info about product click here http://www.haywardandscott.co.uk/res...sp?category=13

Get some names down and what you want and i will get the other prices up
soon.

01. Shmerman - Decat DP classic

i'd be interested in a Subaru Impreza New Age centre pipe if you can get a price for me :)

Can you get a price for a full decat for a classic:

Downpipe, centre and Jap style BB

If the last GB is anythig to go by the prices are as follows:

Original Scooby Design Back Box 5+ = £195-00 + Vat
Jap Style 4.5inch Back Box 5+ = £180-00 + Vat
De-Cat Down Pipe 10+ = £135-00 + Vat
Catted Down Pipe 1+ = £475-00 + Vat (free fitting)
5+ = £425-00 + Vat
10+ = £375-00 + Vat
Equal Length Headers 1+ = £550-00 + Vat
5+ = £475-00 + Vat

5+ Up-pipes £90-00 + Vat
5+ Centre section £60-00 + Vat

ill have back box for my05 original scooby style:luxhello:

01. Shmerman - Decat DP (MY98 Turbo)
02. Willerby6 - Original design back box (MY05 WRX)

How much for a resonated centre section and a bung for a Ninja back box ?

For a 94 WRX

Rob

Down pipe for a my99 classic :)

DOWN PIPE
01. Shmerman - MY98 Turbo
02. Anger - MY99

BACK BOX
01 Willerby6 - Original design MY05 WRX

I make it £375 + v&d

The price for a resonated centre is £150 and a bung is £35 + VAT
Cheers
Mike

DOWN PIPE
01. Shmerman - MY98 Turbo
02. Anger - MY99

BACK BOX
01 Willerby6 - Original design MY05 WRX

How much for a 3" non resonated centre pipe (got a resonated but its not LOUD enough ;)) for a newage.
Please

Centre section £60-00 + Vat mate

I have got a resonated 3" but not got it on yet.....hoping its a little louder than what i have right now but dont want it loud enough to annoy the neighbours.

Sign me up for 1 please.
To be honest and all joking aside the system on my car is rather loud 3" and jap style "silencer" (a large perforated tube).
I had the resonator fitted to a straight through centre section in a bid to take the edge off.
In truth it made no perceptable difference except at tickover.
I only want a replacement center section as I intend to fit a cat into the resonated section for when its required ;) ;)

DOWN PIPE
01. Shmerman - MY98 Turbo
02. Anger - MY99

CENTRE
01. ST AYE - decat Newage

BACK BOX
01 Willerby6 - Original design MY05 WRX

I dont understand why there isnt loads of names down on this GB yet.
There was a lot of interest in decats a couple of week ago on an earlier post and people were saying they would be interested. Now I have organised a GB and there doesnt seem to be many names signing up.

This GB cant go on for to long as people wont stick around for ever, so get ya names down and stir up some intest else where. The more buyers we get the cheaper it will be for us all.

Cheers
Mike

will they do a 3" down pipe at all?

DaOne they will fabricate whatever you want them to......It not just a case of give me dimentions and we will make u a pipe to fit......they have tried and tested all of their products to make sure they all give maximum performance.
IMHO they are the only people to but exhausts from.
Im gettin a decat 3" straight through DP so if that what you want add ur name.

yes the downpipe sounds good, as cant seam to find a good price 3" DP anywhere :-(

i need to double chect that my centre section will fit a 3" bore, i have the revultion 3" sentre section and backbox at the mo, but the centre section joins onto the standard downpipe, anyway of checking that the 3" bore DP will fit on ok? (not sure if my 3" centre section has a addaptor to make it fit the 2.5 standard DP.

see what i mean??

thanks Ian

Sounds like it may be tapered at the DP end to 2.5" and 3" bore back.
I think the only way of checking is to get under the car and look at the joint.If you jack it up in the right place it would just take a peek or go to a garage and see if they will stick it on the ramps for ya ;)
2.5" or 3" either way H&S are the way forward!
Hope this helps mate.
Let me know if you want your name down - we can sort of the bore measurments later.

what are the options on back boxes and prices

i want something to go onto my 3" janspeed centre section

Original Scooby Design Back Box 5+ = £195-00 + Vat
Jap Style 4.5inch Back Box 5+ = £180-00 + Vat

Thats for 2.5" OR 3"

Is this still a decat classic GB or a H&S free for all?????

If so, I'll have a jap style bb for an MY04 STi :lol1: :lol1: :lol1:

Does the price include 'fitting or posting' like before?


Cheers :thumb:

Free for all !!! and the fitting was free last time :-) ( not including the down pipe £75 for that ) but postage was extra :-(.

Ian

DOWN PIPE
01. Shmerman - MY98 Turbo
02. Anger - MY99

CENTRE
01. ST AYE - decat Newage

BACK BOX
01 Willerby6 - Original design MY05 WRX
02 PPPRob - jap style + Bung MY04 STi

And I'll have one of the pipes of peace for mine (thats a bung btw :cool: )

:D

Ok PPPRob.....edited the bung in. ;)

DOWN PIPE
01. Shmerman - MY98 Turbo
02. Anger - MY99

CENTRE
01. ST AYE - decat Newage
02 T123VOR- decat MY05 WRX

BACK BOX
01 Willerby6 - Original design MY05 WRX
02 PPPRob - jap style + Bung MY04 STi
03 T123VOR- jap style MY05 WRX

:luxhello: