ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Southern (England) (https://www.scoobynet.com/southern-england-22/)
-   -   4 Wheel Alignment High Wycombe (https://www.scoobynet.com/southern-england-22/520084-4-wheel-alignment-high-wycombe.html)

Adz Turbo 02 June 2006 12:26 PM
4 Wheel Alignment High Wycombe
 
I want to get it all set up as ive just had 4 new tyres put on her and one of them looked like it was all out! Was just wonder if any can recomend any where in the High Wycombe area!

Thanks

Adz

SamUK 02 June 2006 01:01 PM
Power Engeneering in Uxbridge are good...i think near 40min drive from you..

ps: may help if you post in the correct section...;)


--Sam

Bottomfeeder 02 June 2006 01:02 PM
Originally Posted by Adz Turbo
I want to get it all set up as ive just had 4 new tyres put on her and one of them looked like it was all out! Was just wonder if any can recomend any where in the High Wycombe area!

Thanks

Adz
A few people will read my recomendation and tell you "DON'T DO IT" but......
I use Feltham Tyres on Green Lane in Feltham. The guy that did mine was so helpful, obviously knew what he was talking about and let me watch.It only cost £43.00.

Adz Turbo 02 June 2006 01:31 PM
Originally Posted by SamUK
Power Engeneering in Uxbridge are good...i think near 40min drive from you..

ps: may help if you post in the correct section...;)


--Sam
Ive put it other sections, it either gets moved or not even looked at. And im in the south and this is the southern section!!:cuckoo:

SamUK 02 June 2006 01:32 PM
I am also from the south, but this is the forst time i have looked at this section since i joined... lol

Though i think this would come under suspension...

SwissTony 02 June 2006 01:50 PM
no adz has done it right, nothing like a bit of local knowledge..

he wanted a local company, and a form of service that warrants personal experience, so southern it is :D

if he posted elsewhere, he would get loads of technical advice but not really regionally specfic....catch my drift?
(blimey i should be a moderator with my wealth of knowledge :D )

Adz Turbo 02 June 2006 01:55 PM
Originally Posted by SwissTony
no adz has done it right, nothing like a bit of local knowledge..

he wanted a local company, and a form of service that warrants personal experience, so southern it is :D

if he posted elsewhere, he would get loads of technical advice but not really regionally specfic....catch my drift?
(blimey i should be a moderator with my wealth of knowledge :D )
Cheers mate!

See

Ner ner ner ner!!!!!:lol1:

SamUK 02 June 2006 01:55 PM
fair enough...but many people don't look down here...or maybe they do...and its just me...oh well...Sh1t happens...its Friday........ :D

MadMark 02 June 2006 02:04 PM
Do Risboro 4X4 have an alignment jig?

ian_sadler 02 June 2006 03:14 PM
Go to Power Station and get it done right :thumb:

SwissTony 02 June 2006 04:16 PM
Originally Posted by ian_sadler
Go to Power Station and get it done right :thumb:
agree with the bearded one :D
(though suspect he is on commission??)

v5 man 03 June 2006 12:49 AM
go to that tyre and exhaust garage up Hazelmere with the roundabouts and the 2 petrol garages right by it. Thats where mine was done:)

SwissTony 03 June 2006 10:23 AM
Originally Posted by v5 man
go to that tyre and exhaust garage up Hazelmere with the roundabouts and the 2 petrol garages right by it. Thats where mine was done:)

uhhh...hazelmere tyres by chance :D


All times are GMT +1. The time now is 04:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands