ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   where can i get an ic spray kit from? (https://www.scoobynet.com/general-technical-10/484245-where-can-i-get-an-ic-spray-kit-from.html)

rentonone 16 January 2006 07:26 AM

where can i get an ic spray kit from?
 
as above. thanks

GrahamG 16 January 2006 11:02 AM

Scrap yard, or make one like i have.. cost me about £20 ish. Might do a kit. depends on how well mine works. Won't know till it on the road though.

rentonone 16 January 2006 06:37 PM


Originally Posted by GrahamG
Scrap yard, or make one like i have.. cost me about £20 ish. Might do a kit. depends on how well mine works. Won't know till it on the road though.

how did you make yours mate? i made one using the headlamp washer system on my old scoob but i want one that automatic,any ideas?

BrynO 16 January 2006 08:32 PM

Made one up myself with a manual switch in the car and also a boost activated one for the auto function, works fine although I usually leave the fuse out of the auto switch or it drains my washer bottle in no time! ;)

Merv 16 January 2006 09:20 PM

I fitted one of these,works well with a 10lt tank in the boot.

http://www.turbobits.co.uk/acatalog/...ter_spray.html

Merv.

kplonk 17 January 2006 10:06 AM

How did you make it Boost activated?

K

stevem2k 17 January 2006 10:34 AM

Pressure switch off one of the manifold lines

GrahamG 17 January 2006 10:48 AM

Very good website, given me some idea's. like the way the whole intercooler will get water from the pipes.

BrynO 17 January 2006 11:58 AM

Yep, ran a pressure activated switch off the same line my boost gauge is spliced in to. Has an adjuster on the top to trim to go off at desired boost level. I also wired in an LED light on the dash to show when it's going off. Can overrided with the manual switch when needed..

rentonone 17 January 2006 08:32 PM


Originally Posted by BrynO
Yep, ran a pressure activated switch off the same line my boost gauge is spliced in to. Has an adjuster on the top to trim to go off at desired boost level. I also wired in an LED light on the dash to show when it's going off. Can overrided with the manual switch when needed..

where did u get the pressure from mate?

BrynO 17 January 2006 09:31 PM

You mean the pressure feed to the switch? I took a T off the tube coming down from the dumpvalve, about 3" down, I did this to fit a boost gauge and T'd off again to the vacuum switch..

BrynO 17 January 2006 09:43 PM

T off the dump valve

http://img.photobucket.com/albums/v4.../pipetocut.jpg

Switch is down here in front of battery, screw on top is the adjuster, the pump for the I/C spray you can just see in the washer bottle

http://img.photobucket.com/albums/v4...oostswitch.jpg

Scott.T 17 January 2006 09:51 PM

I used what looks to be the same pressure switch as shown above.

but here's my DIY info :
http://bbs.scoobynet.co.uk/showthrea...ht=intercooler

I've also got a couple of better switches now that cost me about 79p from Farnell.co.uk.

BrynO 17 January 2006 10:11 PM

^ nice one, I wouldn't recommend the one I used, it's not of the highest quality ;)


All times are GMT +1. The time now is 08:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands