guage fitting??
 

has anyone bought any bits from lma for fitting oil temp and oil pressure guages
the senders i got with my guages have a 1/8 npt thread
am i right in thinking u have to buy adaptors and/or remote fitting kits
if anyone has can they tell me what the part numbers are as i can order them then
btw my car is a 94 uk turbo if that makes any difference to anything

thx
steve

did this recently to my my00... i did a search and found them i think on floyds project in the modified section

LMAAO95/100/1 t piece kit 1/8 bsp £12.50
LMA067 adapter 1/8 NPT to M18*1.5 £3.15

fast delivery and knew exactly what i needed over the phone

If you are thinking of fitting the oil pressure gauge sender in the same location as the oil pressure switch, located under the alternator 'Demon-Tweeks' do a remote fitting kit. You will need to get the right threaded connector to connect it into the boss in the block. I got another sump plug and drilled and tapped it to take the oil temp sender. When you fit the oil pressure gauge you will find even at idle it is running 6 bar there are a number of threads about this in this forum from what I read it seems to be the norm when the oil is cold. Have fun Steve