How Scoobyclinic Looked After My Car
I am writing this as I want to tell you Scoob owners who have not been to Scoobyclinic how they do perform and how they do look after there customers.
After having the 2.5 engine fitted at Scoobyclinic the thing is finally run in. So popped up to SC on Thursday and had a gearbox change. (6 speed) after discussing it with a few companies who all recommended an Uprated 5 speed or a UK 6 speed I plumbed for the 6 speed as this worked out much cheaper for me. Day 1. Out came the Type R box with front and center diff and in went the 6 speed. Oil change and a check over the car. Day 2. Ultronic ECU fitted and car goes on rollers to get mapped. After some time of mapping they were ready for a power run at 1 bar of boost as expected the car gave 350 bhp and 350 ft lbs torque Check the car over again then lift the boost slightly. This time the car started to scream a bit a little too early. Yes the clutch had given up. They lads adjusted the clutch but to no avail it still slipped. Dam. The boss (Kev) was called who popped in looked at it and said get it in the garage whip the gearbox out and we will have a look. In 20 mins the Gearbox was out and clutch taken apart. It was decided the clutch although still not half worn could just not handle this sort of power. As the torque came in (rather quickly) the clutch just could not handle it. When the flywheel came out you could cook bacon on it. Kev said looks like you will have to buy a clutch Bob pick one out the store you can have it at cost and of course there will be no labor charges. Asked the lads which clutch was best and it was decided I go for the HKS twin plate job, it was the dearest but as I was getting it cost what the hell. Clutch was fitted gearbox back in and back to the rollers. The process of coming off the rollers fitting a clutch and going back on the rollers took an hour. These boys certainly know there stuff. This time no clutch slip and the boost was gradually increased I did mention to the mappers I did not want to go above 1.3 bar as this was a fig recommended by the PowerStation Guys. Next run we got 305.4 BHP at the wheels. Boost and fueling with BHP at Wheels. http://www.bob.szhosting.net/images/...%20Fueling.jpg I really thought this was enough as the car has also got to be reliable and a daily runner. Then up on the screen came the fly wheel figs 382.2 bhp and 380 ft lbs torque. BHP and Torque at flywheel. http://www.bob.szhosting.net/images/...P%20Torque.jpg I was well happy with this. The lads took the car out on the road for final mapping and that was it all finished. I had a very exciting drive home the car just pulls and pulls. In 6 gear a quick blast on an empty stretch of motorway and in no time I was doing well I won’t say but it was very very fast. Dropped on the A38 at Glou and came back on the A & B roads. Bloody hell this thing is fast and the grip I got was very good compared to the DCCD I had the day before. What the lads would have though of it when it was a proper Type R I don’t know but I bet it would have frightened them to death. But the lads at SC are right I do need a softer set of tyres. I will be sending mail to Scoobyclinic thanking them for the great transformation they have done to my car, I am very very happy with it and a small tip will go to the lads who work there, perhaps on Chinese day dinner hour they can all have a curry on me. These lads are great and always willing to chat and explain things and after spending a few days there watching them work on my car and others, I can see they all put there heart into it and really look after the customers cars even when the customer is not there. BTW The coffee machine works wonderfully. Thank you very much Scoobyclinic. |
Bob,
That's excellent :cool: and a very nice report too :D How you finding the 6 speed box? I would have thought with the extra Torque a 5sp box would be less manic, if you know what I mean. My Old 02STiUK needed 6sp as it only had a small power Band :( Tony |
Originally Posted by T5NYW
Bob,
That's excellent :cool: and a very nice report too :D How you finding the 6 speed box? I would have thought with the extra Torque a 5sp box would be less manic, if you know what I mean. My Old 02STiUK needed 6sp as it only had a small power Band :( Tony |
how do you know :)
glad your happy bob cu soon bud,haynes oct 29th ??????????? daz |
Originally Posted by scoobyDAZZA
how do you know :)
glad your happy bob cu soon bud,haynes oct 29th ??????????? daz |
wow, gearbox out and new clutch in.. in one hour :) thats amazing.
took me 9 hours. sounds like you have yourself a great car. |
very interesting report there and seems to sum up the feelings of most folk on here that SC go above and beyond....good stuff.
|
nice thread Bob, hope you enjoy your new found power
|
superb, I wish you could get stuff like this for the megane 225 we're stuck in a tuning black hole at the moment lol
|
Are you Bob Iles -- used to be on here a long time ago? Thought you left the Scooby scene -- what have you got now?
|
Originally Posted by carl
Are you Bob Iles -- used to be on here a long time ago? Thought you left the Scooby scene -- what have you got now?
http://www.bob.szhosting.net/images/69er.jpg Impreza WRX STi 5 Type R WRC Limited Aftermarket Mods: 2.5 Engine STI 9 Crossdrilled Crank STI 9 Rods Uprated Oil Pump HKS Twin Plate Clutch Walbro 255 litres/hr fuel pump & Fuel Reg TD05/06 20g Turbo 550 Injectors HKS Front Mount Intercooler Blitz LM Induction Kit TSL Group A downpipe Firestorm Exhaust Sony XS-HF78 2 Way Component speakers (16cm, 170W MIP) Subaru Locking wheelnuts Clifford Concept 300 Alarm System RAC Trackster 24Hr Protector Pioneer 7400MP CD/MP3 Stereo Clear Side Repeaters Crystal Clear Front Indicators STi V-Ltd rear emblem Team Dynamics Pro Race 7x17" Wheels Brembo Gran Turismo 4-pot 320mm brake kit Ultronic ECU mapped by Scoobyclinic 3-Port Boost Solenoid - Bob Rawle J-W Racing Centre 60mm x3 Gauge Pod STi stainless pedals Defi Control Unit 2 Defi Oil Pressure Meter Defi Oil Temperature Meter Defi Turbo Boost Meter Morretti quad lights. Philips VisionPlus H4 Main Beam Crystal sidelights AST adjustable coilovers. Whiteline Solid Rear Drop Links. removed Whiteline solid Alloy Drop Links. Whiteline 24 mm adjustable rear swaybar. Whiteline 22 mm adjusable front swaybar. H/Duty ARB M. kit and Anti Lift Kit. Bump Steer & Powerstation Geometry Settings Forge Recirc Dump Valve Oil Cooler Kit. |
Great company SC are, really nice bunch of lads that know exactly what they are doing.
Top report mate. |
not being picky but is it really possible to change clutch in under 1 hour?
martin |
As the car was in a few bits anyway, probally. Basically your local Subaru dealer would have charged as though they had to strip it down for each job. They haven't. Fair play :)
|
Fantstic car bob,how long has it taken u to get it up to this standard?
|
Blimey Bob, you'll never stop will you..... looks and sounds like a really fun car!!!
Ron.. |
Hope you dont get to 174mph!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !
|
ive been twice good guys.the guy behind the desk is a good laugh.
|
Saw you up there when it was on the rollers. Nice power figures, glad your clutch was sorted
|
Originally Posted by p1doc
not being picky but is it really possible to change clutch in under 1 hour?
martin The car went on the ramps and I walked to the stores with a few lads to pick a clutch. Had a chat about clutches and picked the twin plate we walked back with the twin plate and the gearbox was on the jack and the flywheel was just being taken off. As quick as that belive me. Don't think Kev will be charging an hours labour for clutches though.:) As the clutch was slipping at 15:30 I thought it would be a come back tomorrow but no it was get it done now... |
Originally Posted by catmeat
Fantstic car bob,how long has it taken u to get it up to this standard?
|
Hi bob. Glad they sorted u out. Remember me i was the one you were talking to at the clinic while i was having my blue sport looked at.
P.S I agree about the drinks machine makes a lovely hot chocolate. |
Originally Posted by kevinmusson41
Hi bob. Glad they sorted u out. Remember me i was the one you were talking to at the clinic while i was having my blue sport looked at.
P.S I agree about the drinks machine makes a lovely hot chocolate. |
Originally Posted by bob
Had the car a year now. It popped the bigend 2 months ago. It was then a decision to scrap it or spend money on it. You know the rest..:)
|
Originally Posted by joedesi
If you dont mind me asking...how much did it cost to get the engine rebuilt and where did u get it done?
|
What a great thread Bob!:)
Thank you for all your kind words and by the sounds of your post you are more than happy with the results, we knew you would have a little play on the way home even when you said you were going to take it slow.:norty: Great results for a well sorted scoob I wouldn't want meet you out on the road:cry: Pat&Andy both said it was quick and for them to say that........... IT'S QUICK!:) It was a pleasure to have you at the clinic it's great for us to get customers that are down to earth and enjoy thier cars as much as we do,you must have tried all of the flavours in the drinks machine any favourites? lol I hope you don't mind me saying this but Bob (bless him) called up today and arranged it for ALL of the lads to have a Chinese meal at work this Friday It was such a nice gesture it really did touch the lads and give us all a great feeling of job satisfaction, again thank you Bob :thumb: Don't be a stranger mate, even though you live in Bristol! take care Adam,Kev,David,Mark,Andy,Numptie,Dale,Beefa,Rob,Pa ul,Ayresy,Tom and CO. |
G'Day!
What is the Ultronic ECU? Sounds interesting haven't heard of that. Any information at all please? |
Originally Posted by Kael
G'Day!
What is the Ultronic ECU? Sounds interesting haven't heard of that. Any information at all please? Bob we had our chinese yesterday it was great mate thanks alot!! |
All times are GMT +1. The time now is 05:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands