ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Member's Gallery (https://www.scoobynet.com/members-gallery-5/)
-   -   Pic request - Triple centre pod gauges (https://www.scoobynet.com/members-gallery-5/455561-pic-request-triple-centre-pod-gauges.html)

simb 2 08 September 2005 08:57 PM

Pic request - Triple centre pod gauges
 
Looking to get a set of these, if anybody has got any pic's, recommendations where to get them and prices would be great.

Thanks

simb

monty baber 08 September 2005 09:11 PM

These are the optional fitted Subaru ones, not a patch on Defi's but they do the job

http://img.photobucket.com/albums/v6...r/DSCF0005.jpg

scooby-doo-where-r-u 08 September 2005 09:19 PM


Originally Posted by simb 2
Looking to get a set of these, if anybody has got any pic's, recommendations where to get them and prices would be great.

Thanks

simb

Are you looking to fit them in a newage or classic??? and what guages do you want to fit? And i mean type i.e boost, oil temp, water temp, voltage etc. etc.

16vmarc 08 September 2005 09:32 PM

http://img.photobucket.com/albums/v30/16vmarc/litup.jpg

Megan Racing and Scoobyworld pod.

Silver Scooby Sport 08 September 2005 09:51 PM


Originally Posted by scooby-doo-where-r-u
Are you looking to fit them in a newage or classic??? and what guages do you want to fit? And i mean type i.e boost, oil temp, water temp, voltage etc. etc.

I can answer some of that for you quickly in Si's absence...

V5 type R Classic... and I know he already has a boost gauge so I'm not sure if he would be looking to replace that. Si is having an engine rebuild plus a few other things and he wants to be able to monitor what's going on under there and check everything is as it should be.

What would your 3 gauge suggestions be everyone assuming the boost stays ?

Now I've a question for Si ;) are you thinking of 60mm or 52mm gauges ?

Simon :D

scooby-doo-where-r-u 08 September 2005 10:03 PM


Originally Posted by 16vmarc

Here are a few pics of a Carbon jobby similar to above with autogauge gauges. Can't see them whilst turned off due to smoked lense! and i don't have any of them on, but have included some i found on the net also.

http://img.photobucket.com/albums/v3...s/HPIM0110.jpg

http://img.photobucket.com/albums/v3...s/HPIM0112.jpg

http://img.photobucket.com/albums/v3...mokednosee.jpg

http://img.photobucket.com/albums/v3..._smokedsee.jpg

Gauge pod = £75 delivered (available 52mm and 60mm) and guages vary depending on what you want?

check here - http://www.xyberautos.com/catalog/default.php
really helped me out and got them really quickly too.

Hope it helps

Tasberley 09 September 2005 02:23 AM

my array of gauges:

https://i2.photobucket.com/albums/y3...y/P1010001.jpg

simb 2 09 September 2005 05:59 PM


Originally Posted by scooby-doo-where-r-u
Are you looking to fit them in a newage or classic??? and what guages do you want to fit? And i mean type i.e boost, oil temp, water temp, voltage etc. etc.

Thanks for all the pic's so far everybody!!

As Si said a Classic, after seeing some pic's i'm gonna be looking at 52mm gauges with the pod being a flat-top. I've already got a boost gauge which are the same make as Tasberley's gauges. So will try and keep that trend going.

For two of the gauges I want oil temp and oil pressure, just not decided on the third yet?

simb

Foxmod 09 September 2005 08:26 PM

Here you go :-

http://img.photobucket.com/albums/v3.../CentreCon.jpg
http://img.photobucket.com/albums/v3.../GaugesOn2.jpg
http://img.photobucket.com/albums/v3...Controller.jpg
http://img.photobucket.com/albums/v3...mod/Gauges.jpg

Dave :D

Tasberley 10 September 2005 11:00 AM

air fuel ration like mine??

simb 2 12 September 2005 07:31 AM

I thought it was oil temp - oil pressure and then boost gauge?

Where did you source your gauges from?

simb


All times are GMT +1. The time now is 01:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands