:D

Hi,

So what is the best design for the FMIC :

1. Bar & Plate
2. Tube and Fin

and best option for piping :

1. Stainless steel
2. Ali

i have fit one of these intercoolers that cost £250 they are ok but you get what you pay for the pipe work is mild steel and has shoddy welding and you don,t get all the pipe work you need the joining clips are just jubilee clips i have found the best one,s are off harvey smith he supplies every thing you need and is always on the end of the phone if you have any problems i believe he can even gat them fitted for a good price for you

Good advert.

Lol, not a full stop in sight on that post ;).

As soon as it arrives I'll host some pics.. maybe some of the install too.

I had no idea my post was worthy of a quote ;). Any info you can give us will be very useful to put it mildly. Install pics would fantastic too tbh :).

Cheers,

Nick :)

mmmm, maybe interested in one of these. Looking at upgrading to an STI7/8 IC, but at this price its very inetersting. Let us know how it goes! :D:D

Well if it turns up I'll pop some pics up of the contents etc...

I'll be watching this post with interest.

I've been watching these on ebay aswell, When some one gets theres, I'm interested to know how the dump volve connnects, I have a MY99 uk turbo and the DV bolts directly onto the standard intercooler.

fitted a flea-bay fmic to mine a month ago,all looks fine,slightly dearer than 215 but still a bargain when it eventually came
i also have a my99-00 , , re the bov . . get 1 for a my98 and a samco straight reducer pipe 35-25mm . . fits a piece of pi55 then
i must do the magnet check though..lol
heres some pics of mine,
note the inner wing HAD to be cut and the pipe runs under the K+N

also a good idea to lag the pipe that runs over the turbo
http://img.photobucket.com/albums/11...02/fmic010.jpg

http://img.photobucket.com/albums/11...02/fmic011.jpg

http://img.photobucket.com/albums/11...02/fmic013.jpg

http://img.photobucket.com/albums/11...02/fmic003.jpg

http://img.photobucket.com/albums/11...802/sbo011.jpg

daz

Magnet check?

to see if it's stainless or ally presumably? hopefully not mild steel...

Sorry, complete brainfart last night.

Cheers for that info regarding BOV.

I've never atempted anything like this before, How hard is it to fit, cut bumper etc and how long did it take to fit. Or does anyone know how much it would cost to have one fitted and where to get that done.

The ad would suggest the inner wing did'nt have to be cut on 96 onwards cars.. hmmmm

For hybrid/Ebay fitting read delboy's thread http://bbs.scoobynet.co.uk/showthread.php?t=295624

Here are a few pics of mine

http://server3.uploadit.org/files/jaymawrx-DVsamcos.jpg

http://server2.uploadit.org/files/ja...MICbumpOff.jpg

DV wise, using a MY98 Forge recirc I needed:
Samco 35mm elbow
Samco 35mm to 25mm straight reducer
Approx 400mm of 25mm pipe

its all good as far as i am concerned, as long as it arrives ;)

the kit dazza has is the autobhan version, although i do belive the seller said sumwhere it was not an autobhan kit?

TBH im doubtfull of noticable gains over one make then another
as long as there not leaking or anything daft like that, and there in the right place.

I've just bought one of these as well, I remember seeing scoobyDAZZA's car at SBO and thinking the intercooler looked really good, didn't realise at the time which one it was.

Cant wait for it to arive now.

####################

1. SCOOBYD00
2. FerryScoob
3. StickyMicky
4. dr_jones
5. dbrad
6.

#####################

did anybody ask the seller when they were due to be deliverd??

I didn't but he had this on the add:

"Terms & Conditions
Some modifications my be needed to fit any of our items we sell. Please make sure you
purchase the correct item as we cannot exchange once bought.
We take no responsibility for any damaged caused whilst fitting our items
If we are unable to deliver within a 28 day period then buyer and seller will agree mutually not
to complete the transaction and a full refund will be given. If you however decide that you still want the
item we will endeavour to get it to you as soon as is possible."

So hoping to receive by the 19th Aug...

Bought mine on the 20th.. couple of weeks still :( what contact you guys had back from this seller? Noticed a few others going for the £280 mark... they did appear to be in the UK with next day delivery...

no idea.lol. i just bought the bloody thing . . is it good or not ?
i did buy mine from somewhere else though
but they do look the same :D

still aint done the magnet check,forgot <d'oh> , and now the scoobs in the garage getting the gauges fitted :p

daz

it will be fine IMO

Forgot to add my name to the list in my last post!!

####################

1. SCOOBYD00
2. FerryScoob
3. StickyMicky
4. dr_jones
5. dbrad
6. bruce
7.

#####################

Ebays full of these... different user names... same pic lol :D None as cheap as our deal tho. We shall see..

hello people,

im looking into buying one of these fmic,

could you pls keep us informed with how you got on or get on with this item(the ones of ebay),

thanks in advance and thanks for your time.:)

anysign of your FMIC's peeps?

Nah no tyet - I'd be suprised to see it before another couple of weeks...