VF 28 Rating
Am thinking of buying a vf28 roller bearing turbo to replace my td04...
Is it the right move or is there a better option, Not looking for a million bhp lol just a bit more :) Thanks Guys and Gals |
VF28 is standard install on STi5's which are 276BHP, they are quite happy producing 310BHP.
|
I just replaced my td04 with a vf28 and its well worth doing if like myself you just want a modest increase.
Mine pulls hard all the way to redline now :norty: |
It will not spool as well as the TD04 but it will give more power once it starts to go.
With ALL the supporting mods it is capable of over 360 bhp. If you believe what TSL say in the suplement in the current Jap Performance,"with a massive 1.8 bar of boost through the IHI VF28 blower. That equates to over 400bhp and 400 ft lbs of torque." Remember some people exaggerate and tell porkies. It will add noticably more power but you may miss the low down spool and it will need a remap to optimise the potential benefits. |
Thanks for the info guys :)
What other options on the turbo do i have with a tmic ? I will have to upgrade the i\c as well or will i ? but what too ?
Originally Posted by harvey
It will not spool as well as the TD04 but it will give more power once it starts to go.
With ALL the supporting mods it is capable of over 360 bhp. If you believe what TSL say in the suplement in the current Jap Performance,"with a massive 1.8 bar of boost through the IHI VF28 blower. That equates to over 400bhp and 400 ft lbs of torque." Remember some people exaggerate and tell porkies. It will add noticably more power but you may miss the low down spool and it will need a remap to optimise the potential benefits. |
My current spec is top mount i/c
full hks de cat k&n induction kit hks evc v boost controller 1.2 bar held 380cc injectors Last dyno run with the same spec but a tdo4 produced 280 bhp, next dyno run on 19th march :norty: |
Andy, YHPM... let us know what you get at the RR ;)
|
Good luck with the r\run
What tmic you running ?
Originally Posted by andypugh2000
My current spec is top mount i/c
full hks de cat k&n induction kit hks evc v boost controller 1.2 bar held 380cc injectors Last dyno run with the same spec but a tdo4 produced 280 bhp, next dyno run on 19th march :norty: |
The VF34 & VF35 are also capable of perhaps 350bhp, and are slightly newer than the VF28 (though not a big leap forward). Another option that I believe is very similarly sized, spool up etc is the APS SR30.
If you can live with slightly slower spool up and want a bit more power, a lot of people enjoy the Front Entry TD05, and the newly popular TD05/18G is meant to be a good variant of that, maybe capable of 400bhp. Best of the lot for power vs spool up - but requires a lot more money in special headers, downpipe etc - are the twin scroll turbos. Can't claim major experience with any of these, but you did ask what other options! |
Thanks for the info
Am now on the look out for a turbo hint hint lol :) What you reckon on the tmic surely the standard one isnt going to do it ? Have been told to get 2002 uk wrx easier to fit than sti8 ? Or ????? |
To get the most from a turbo upgrade it would be wise to do the I/C. If you're going for a VF28 you wouldn't go far wrong with a P1 / STi 5 I/C.
There's a nice looking VF34 in "for sale" and one on ebay too. Andy, your injectors must be near max duty cycle? My 440's are nearly maxed out on my standard VF28 with TEk3, headers, decat etc. MB |
MArk, IIRC your running more then 1.2 tho'
|
Ah, didn't spot that :) Was looking at the BHP figure...
MB |
1.8bar from a vf28 :eek:
|
It did look very suspicious....
MB |
i had a vf28 on my version 6,and blew it up..i was only running 1.17bar but this seemed to much.i spoke to turbo dynamics and they surgested that the 300 bhp that i had was possibly to much for the turbo ie.vf28=280bhp....i have now got a vf34hybrid,and am working within my limits......= speak to the pros,i would surgest a call to turbo dynamics.......p.s. i dont work for them,but i felt they were a great help.
|
Woman driver, standard MY98 uk top mount ;)
Injectors? well maybe they are near the limit at 1.2 bar but thats also where my budget stops :D andy ;) |
Cheers Andy
Am looking for a bigger tmic and turbo now just see what comes along :thumb: Am running 1.2 on the td04 but runs out of puff :) Anyone got a turbo or tmic for sale :idea: |
If Turbo Dynamics say a VF 28 is only good for 280 bhp, it re-enforces my opinion of them.
A TD05 would be an easy upgrade for you. A bit less spool but more power overall. As I do not know your full spec I cannot comment fully but your top mount will handle a TD05 satisfactorily, up to 300 bhp plus anyway despite the fact that I would like to sell you an FMIC. ;) E-mail me your spec if you want further comment. www.geocities.com/harveysmith3000 |
I reckon the average VF28 could probably squeak 340 bhp if the supporting mods are ok, however they can't be run at 1.8 bar, just generates loads of hot air, as for 400 bhp from one then rotfl.
For a std engined UK car with tmic its a good option as is the VF34, the VF35 is "ok" in that is has a quicker spool but suffers from surge and boost creep due to the tiny turbine hsg it has. As a best compromise between quick reaction and reasonable uplift (100 bhp for a UK car) then has to be seriously considered. some thoughts bob |
how about a vf23?
|
Originally Posted by Bob Rawle
I reckon the average VF28 could probably squeak 340 bhp if the supporting mods are ok, however they can't be run at 1.8 bar, just generates loads of hot air, as for 400 bhp from one then rotfl.
For a std engined UK car with tmic its a good option as is the VF34, the VF35 is "ok" in that is has a quicker spool but suffers from surge and boost creep due to the tiny turbine hsg it has. As a best compromise between quick reaction and reasonable uplift (100 bhp for a UK car) then has to be seriously considered. some thoughts bob What are your thoughts on my 380cc injectors running the Vf28 at 1.2 bar, I would hazard a guess they are at max duty cycle, was thinking of upgrading them but I only have the phase 1 engine and non mappable ecu so would mean getting a motec etc?? Also I want anti lag fitted any ideas who can supply and fit this along with injectors and ecu? Andy ;) |
Well my 440's are almost at max at 21 psi (STi5).
There are many other options than a Motec. Link / Gems / Apexi Power FC etc... Although Motec and Gems will support antilag. Why do you want it? Doing some rallying? ;) MB |
Originally Posted by Dark Blue Mark
Well my 440's are almost at max at 21 psi (STi5).
There are many other options than a Motec. Link / Gems / Apexi Power FC etc... Although Motec and Gems will support antilag. Why do you want it? Doing some rallying? ;) MB |
As i understand it using antilag with any VF turbo would greatly reduce the life span of the turbo, as they are not the strongest of turbos.
|
vf34,decent top mount,550cc injectors and re-map ;-)
that should do you im getting the above and remapped april 16th if you can wait till then ill let u know wot i think its for my00 uk |
Originally Posted by RoRu
As i understand it using antilag with any VF turbo would greatly reduce the life span of the turbo, as they are not the strongest of turbos.
|
the 380's will max out, however I ran my 440cc injectors in the STi5 at 126% duty to achieve 346 bhp at the time and there was no apparant real issue, not desirable, so answer is suck and see, I would suspect it will run lean above 5700 rpm which is pretty typical. there are 440cc or 480 cc injectors available that would suit, would prbably make the difference if you didn't want aftremarket management and with care and some checking could work.
bob |
Thanks bob, loks like I may just "suck it and see" with my current setup for a while and after my wedding get a gems/motec and some larger injectors ;)
Thanks again AP |
Question for Bob......
Would an uprated fuel pump and regulator be required for a VF28 running 440's on a UK MY00. Or is this a 'follow the crowd' modification that isn't really required for a VF28 running just the right side of 300BHP. |
All times are GMT +1. The time now is 01:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands