Good pictures of the Godspeed 335 conversion kit wanted
 

Anyone got any detailed pictures of these, i want to see how they are mounted before i commit any money.

I've e-mailed you the fitting instructions mate.....

The kit:
http://img.photobucket.com/albums/10...r/c8dc14cb.jpg

Behind wheels:
http://img.photobucket.com/albums/10...r/297e40d4.jpg


Sorry I don't have any of the fitting/mounting points :(

got any full side shots??

The only pic's I have but may help.

Before....Oh dear!


http://www.showoffyourcar.com/cars/SUBARU/4859.jpg


Ready to go on


http://www.showoffyourcar.com/cars/SUBARU/6315.jpg


Just about finished

http://www.showoffyourcar.com/cars/SUBARU/6316.jpg

http://www.showoffyourcar.com/cars/SUBARU/6317.jpg


PERFECTION

http://www.showoffyourcar.com/cars/SUBARU/6318.jpg

http://www.showoffyourcar.com/cars/SUBARU/6319.jpg



simb

Thanks guys!!! :D

How do you all find this kit?? Is it a massive improvement over the standard setup? What pads are you using, i'm considering red stuff ceramics. I like the fact that you can use the bigger pads (DB7, XJS parts) which are in fact cheaper!!!!

Is the mounting bracket machined, or just cut thick sheet?

Simb, have you had any problems with the cross drilled discs cracking?

Have mailed you back mate!!

twice!!

How much do these cost? I really want a set, and a set in the US no less :(

No problems mate.

simb

Mine are starting to show signs of cracking/ Crazing from the bolt holes on the Ali bel , Where the Allen bolt go's through the disc .

It is very slight , But i'am keeping a very close eye on it

Tiny...

Now that is worrying, very expensive to replace the lot! How many miles ahave they covered??

Dyney, can I just ask, how did you manage to get yours in an anodized blue finish on the bells??? I'm sure I asked Ian when I bought mine and he said he didn't do it :(
(was about 1 1/2 years ago mind!)

Looks :cool:

He's only recently started to do it.

simb

I Would say that they have covered about 10K IIRC

They are not starting to crack from the holes in the discs , Not even sure if they are cracks ( Crazing ?? ) Very faint black lines .. Not deep just marked on the surface

If you look @ the pic above ( Simb 2) The Cracking / Crazing is coming from around the 10 no allen bolt thingy's that bolt the Alli bell to the disc

Hope this helps ?

Have mailed Ian about this , Was told not to worry , But just to keep an eye on it

Tiny..

See if i can get a pic on Sun for you

Pickle,
I had them anodised after I bought them. Look as good now as the day I fitted them (2 years ago) :)
Think the anodising cost me £20 cash ;)

Ian can anodise the bells and brackets loads of different colours but adds £25 to the cost of the kit