ScoobyNet.com - Subaru Enthusiast Forum - eLabtronics intelligent water spray controller

eLabtronics water spray controller, intelligent type - uses ambient air and intake air temps, fuel injector duty setting, to turn on IC waterspray when needed ( when inlet air getting hotter and pressing on ! ).

Comes cased with wiring, instructions etc.

Looking for around £75 ??

Needs a bit of setting up to set trigger point but simple few wires to fir ( 2 sensors, power & earth, injector wire and then wires to spray water pump ).

Intelligent Intercooler Water Spray Controller Module (BOXED)
The Labtronics / AutoSpeed intercooler water spray controller actually analyses driver behaviour and intercooler temperatures and then decides exactly when and for how long to work the spray. This approach overcomes most of the traditional problems associated with using a boost switch, and at a very competitive price.

Included:

One module mounted in durable plastic box
Mounted thermistors attached to generous lengths of cable
Multi-pin plugs and wiring loom
The control module will interface with any 12V pump

Not used in anger, fitted and it works, but not set up properly.

See these links for more info!

It can be also used to control other car electrics, see articles below

http://www.elabtronics.com/products_...controller.htm

5 part article on this.

http://www.autospeed.com/cms/A_0527/article.html
http://www.autospeed.com/cms/article.html?&A=0534
http://www.autospeed.com/cms/article.html?&A=0574
http://www.autospeed.com/cms/article.html?&A=0578
http://www.autospeed.com/cms/article.html?&A=0578