Rear struts....how do you get to them?
 

How do you remove the rear struts? Im supposed to be changing the springs tomorrow but im not too sure how to get the rear struts out.....

anyone got any tips?

When you work it out let me know 'cos I'll be doing it soon too :D

F

bugger i thought someone had actually answered......then i realised it was you :P

On a classic, you need to remove the rear seats. You can then access the 3 retaining bolts holding each strut. Another thing to watch for is the brake line goes through a bracket on the strut. You need to remove the clip from the bracket and clamp the brake line (I used a set of mole grips with a bit of cardboard in the jaws). Now, remove the brake line from the caliper and then feed it through the bracket on the strut.

Oh, the joy of owning a wagon :D

Also if you mark around where the strut meets the hub (paint/marker pen) before you start, then when you re-fit you should be able to get the geometry about right. That's assuming it was ok to start with ;)

Dave.