Can you 'tighten' the brake pedal?
By this I mean get rid of some of the pedal movement that causes no braking effect? Dial out the 'slack' so to speak...?
It's actually for an Audi RS4 but I assume most cars work the same and have a rod from the pedal to the servo? D |
You can take up some pedal travel by adjusting the pushrod from the master cylinder
Pull off the master cyl (dont disconect any pipes) and paint the head of the pushrod and push it up to the servo and take up the adjustment until it touches Then back it off 2mill Havnt done it on an audi so maybe useless info Just a thought :)
Originally Posted by Diesel
By this I mean get rid of some of the pedal movement that causes no braking effect? Dial out the 'slack' so to speak...?
It's actually for an Audi RS4 but I assume most cars work the same and have a rod from the pedal to the servo? D |
So mate, there's an adjustment the 'other' side of the servo? Sorry cant quite see this one in my minds eye!
I need to remove the master cyl from the servo revealing a rod? This rod's length I can then adjust so as it sits deeper in the master cyl - effectively lengthen it? Thanks for your help. D |
The rod is adjustable from the m\cyl to servo or servo to pedal...I will see if i can find some pics for you
Originally Posted by Diesel
So mate, there's an adjustment the 'other' side of the servo? Sorry cant quite see this one in my minds eye!
I need to remove the master cyl from the servo revealing a rod? This rod's length I can then adjust so as it sits deeper in the master cyl - effectively lengthen it? Thanks for your help. D |
All times are GMT +1. The time now is 02:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands