full decat, sti filter and tek 2.5???
 

hi, i've had a quick look on search but how much power/torque have people been getting with a similar set up?

cheers matt.:)

ps my00 turbo, ss dp, magnex centre and sti bb.
"john banks" tek 2.5

Maybe 260bhp?

fitted the tek 2.5 tonight, nevermind power figures, it's definitly faster. :D:D:D

So it should be :D It was tested/developed at Knockhill by the most lunatic driver I could find - you know who you are LOL, tested beyond the limits that any other driver I've sat with could except AndyF.

i like your work. :D

I achieved 260bhp and 262lb/ft on my MY00 with:
Tek2.5
Full H&S exhaust
K&N panel

The above was achieved at Power Engineering btw

i've ordered some samco hoses, does anyone have a link to an idiots guide to fitting them? with pics hopefully :)

is a knocklink essential?

cheers matt :)

Disconnect the dump valve connections from the dump valve. Undo the bolts that hold on either side of the intercooler. Release the throttle body hose, release the turbo outlet hose. Then lift up and backwards the intercooler and remove it. Replace the hoses underneath and refit as reverse.