TOAD Ai606 instructions
does anyone have a wiring diagram for a toad ai606, i know that these are not supplied by toad with the alarm. but we have removed one from my m8s old car and want to fit it to his new one, hence we need the wiring diagram
|
let me know via e-mail what you need to know, as you should already know which are the immobilisation, power, 2 earths and full ignition, otherwise it could be tricky
adz807090@hotmail.com I havn't got them on paper, they are in my head, but could right down what's needed for you, let me know what car too, for the c/lock wires. Adam |
I have fitting instructions on cdrom, i've never looked at them as mine was fitted professionally but i can send it to you to try if you pm me your address?
|
Ai606 alarm
Originally Posted by Jamescsti
I have fitting instructions on cdrom, i've never looked at them as mine was fitted professionally but i can send it to you to try if you pm me your address?
I would be very grateful for this as they do seem quite difficult to get hold of. Thanks, Higart |
Toad Ai606
Originally Posted by donutman
does anyone have a wiring diagram for a toad ai606, i know that these are not supplied by toad with the alarm. but we have removed one from my m8s old car and want to fit it to his new one, hence we need the wiring diagram
Thanks in advance. |
if you have no wire tabs, you will need to get a car battery and wire up the power feeds and then locate at least one earth, then u can use a multi meter to identify which black wires are paired to each other for the immobilser.
|
i have the ai606 instruction manual saved as zip file if anybody still needs it?
|
Toad AI606 alarm installation instructions in ZIP format
Originally Posted by bashman
i have the ai606 instruction manual saved as zip file if anybody still needs it?
Could you please email me this file to asmt87@dsl.pipex.com Thanks in advance Gordon |
Me too please, iI've an ai600 so hopefully it's similar as my alarmis gone bonkers... jpmcgloin@yahoo.com
Cheers John |
johnmc & asmt87 you have mail :)
|
Originally Posted by superclarkey
I've been searching the internet for the wireing diagram so i can install it into my 200SX, would you be able to send the instructions to me please.
Thanx again. |
Thanks Bashman, just printing it out at the moment.
Cheers John |
Originally Posted by Jamescsti
I have fitting instructions on cdrom, i've never looked at them as mine was fitted professionally but i can send it to you to try if you pm me your address?
|
me too please!
:) |
Originally Posted by bashman
i have the ai606 instruction manual saved as zip file if anybody still needs it?
|
wiring diagram
wiring any1 help me i need the wiring diagram for the toad ai606 if any1 has got it plz cbiggen@hotmail.com
|
Has anyone still got the wiring diagram for the Toad ai606? If so could you please email it to me : thedragon@dsl.pipex.com
|
Originally Posted by bashman
i have the ai606 instruction manual saved as zip file if anybody still needs it?
me email addy is john_anderson53@hotmail.com cheers Leroy |
<>
|
Originally Posted by bashman
i have the ai606 instruction manual saved as zip file if anybody still needs it?
THANKS STEVE |
Originally Posted by bashman
i have the ai606 instruction manual saved as zip file if anybody still needs it?
SHUV132@blueyonder.co.uk THANX STEVE |
TOAD AI606
Originally Posted by Scoob+Bike=Fun
let me know via e-mail what you need to know, as you should already know which are the immobilisation, power, 2 earths and full ignition, otherwise it could be tricky
adz807090@hotmail.com I havn't got them on paper, they are in my head, but could right down what's needed for you, let me know what car too, for the c/lock wires. Adam MANY THANX STEVE |
Originally Posted by Scoob+Bike=Fun
let me know via e-mail what you need to know, as you should already know which are the immobilisation, power, 2 earths and full ignition, otherwise it could be tricky
adz807090@hotmail.com I havn't got them on paper, they are in my head, but could right down what's needed for you, let me know what car too, for the c/lock wires. Adam MANY THANX STEVE SHUV132@blueyonder.co.uk |
toad ai606
hi can anyone help me as i also need the wiring diagram the ai606 my brother took it out of his car to give to me and didn't label the wiring. any help would be appreciated thanks.
|
toad ai606
Originally Posted by Jamescsti
I have fitting instructions on cdrom, i've never looked at them as mine was fitted professionally but i can send it to you to try if you pm me your address?
|
Toad Ai606 intsall FTO
I have an installation pdf if it helps....if its going into an FTO, unless its done by a toad installer or Thatcham approved installer and stamped Install Certificate and Installer Registration it aint worth diddly squat for insurance.. Trust me I know, I have an FTO GPX MIVEC
Originally Posted by AsianGunner
can i have the instructions too please mate, to asiangunner@hotmail.com
how hard are they to fit? its gana be goin in to my brothers fto. |
PM me and I'll send you the TOAD install pdf
Originally Posted by graystar
Hi i was wondering if you could send me the instructions as i'm trying to fit a ai606 to my vw golf it hasnt central locking, and i can work out some of the wires but not all.many thanks : :idea:
|
TOAD
Originally Posted by enseenet
PM me and I'll send you the TOAD install pdf
Can someone please send me any helpful information to install a toad ai606 to my car. Cheers u41sam@abdn.ac.uk |
can somone please email me the Toad Ai606 installation manual (pdf doc)
REALLY apreciate it!:notworthy alistair.cox@gmail.com |
Hi to all,
I am a newbie to the forum and would like to request if someone could send me the wiring diagram for the Toad Ai606 and if possible the installation manual. yus_a00@hotmail.com Thanks in advance, |
All times are GMT +1. The time now is 09:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands