ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   What would I need 4 Defi's? (https://www.scoobynet.com/interior-15/367711-what-would-i-need-4-defis.html)

darms 04 October 2004 11:20 PM

What would I need 4 Defi's?
 
i'm looking to get some Defi 60mm White faced gauges for my MY00....

Turbo
Oil Pressure
Oil Temperature
Controller II

Do I need to also order any of the Defi fitting kits?

Thanks inadvance

gossythevaleter 05 October 2004 08:17 AM

It depends on where you want to fit em
If you want them in the pocket on top of of the dash then yes you need a pod if you wqnt them free standing then no as they come with these as part of the kit
I have a defi II controller and centre pod for sale so all you need to do is get the gauges which will out to be about £280 for the 3 gauges you are talking about

Ray_li 05 October 2004 09:07 AM

£280 these Defi stuff not cheap.

darms 05 October 2004 09:18 AM

So I take it I wont need to purchase any fitting kits then, right?

alcazar 05 October 2004 10:36 AM

No, Defis come with everything you need: pod for one gauge, wiring, sender instructions (in Japanese!!!), gauge itself, and all fixings etc.

I have mine in a pod on top of the dash, bought from Scoobymania, and it replaces the daft trinket tray.

My controller is where there ought to be a cupholder, but there was just a blanking plate on my '98 car:(:

BTW: instructions in English on the Defi site.

Alcazar

darms 05 October 2004 10:51 AM

Thanks Alcazar.

I managed to pick up a Greedy two gauge A Pillar Pod from Ebay for £18. What a bargain. Just have to wait for the gauges to arrive from hong kong.

messiah 05 October 2004 11:05 AM

darms - are you getting the guages from sti racing?

Also - I thought you had to buy the senders seperately - am i wrong?

darms 05 October 2004 12:56 PM

Yeah messiah , just waiting on Simon to get back from China.

Not sure about the senders, will have to run that one also past Simon.

Thanks

Gidney&Knowlesy 05 October 2004 01:08 PM

May need block adaptor for oil pressure & sump adaptor for oil temp; depends where you install them.....

alcazar 05 October 2004 01:29 PM

When I bought mine, they ALL 3 came with senders, same 3 as you're buying.

You will need an adaptor to put the oil temperature sender into the tapping above No3 cylinder, which is accepted as the best place for it, and you'll probably want a LONG 8mm Allen key to remove the plug from the tapping before screwing in the adaptor.
My adaptor was from Scoobymania, about £8.

My oil pressure sender replaces the OE oil pressure switch, which is redundant as it only comes on below 20psi, IIRC which is WAY too low. Defis have a programmable low oil pressure warning, mine being set at 30psi.

The boost gauge connects to the spare outlet on top of the inlet manifold, it's the one at front right, looking at the car from the front, and has a rubber cover over it.

IMO, the idea that Defis come without senders has grown up from the FACT that you can't use them without the control box.

Alcazar

darms 05 October 2004 02:47 PM

Thanks Alcazar

Most informative.......

May PM you (if you dont mind) once I get them should i get stuck fitting 'em

Ray_li 05 October 2004 03:51 PM

Think im looking forward to my trip to Hong Kong next year. Hopefully pick some cheap defi stuff up.

Ray

alcazar 05 October 2004 06:19 PM


Originally Posted by darms
Thanks Alcazar

Most informative.......

May PM you (if you dont mind) once I get them should i get stuck fitting 'em

No probs. Also look at www.chiark.co.uk
Alcazar


All times are GMT +1. The time now is 05:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands