ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ICE (https://www.scoobynet.com/ice-2/)
-   -   Fixings Sub Box into the Boot (https://www.scoobynet.com/ice-2/361153-fixings-sub-box-into-the-boot.html)

MadDog74 11 September 2004 09:41 PM

Fixings Sub Box into the Boot
 
Hi

Will it be safe for me to drill into the boot floor between the rear seats and the spare wheel well to attach a sub box.

Or

Will I drill thorugh something I don`t won`t too.

Thanks for any help.



Paul

UHF 12 September 2004 11:51 AM

The fuel tank is under the boot floor, personally I wouldnt.

Best way to secure it is to get something to make a new floor (like a large peice of chipboard, wouldnt use mdf as its too heavy and the density isnt required), then screw it to that, you can secure the new floor in a few places.

I tried for years to secure my 12" sub and box, velcro secures it nicely to the carpet, but then the carpet moves!!!

Failing that, roll the carpet clean out the way and velcro it to the metal with sticky back velcro

MAFFA 13 September 2004 12:03 AM

Depends on what type of box it is. I had a box with two 10" subs in that slotted nicely behind the rear seats which I secured with just a strap (about £5 from Homebase) around the metal bar that runs along the bottom of the rear seat.

I now have a stealth box which i've secured by getting a couple of pieces of wood and screwing it to the side lining of the boot with the wood on the other side. No need for fake floors, very neat & doesn't move. The only prob I came across was that I had to take the lining out to secure the box to it & then put the box & lining back in together. Works a treat though :)

Hope this helps

MAFFA

nraponi 13 September 2004 07:41 AM

I've taken the easy option and used 'industrial' (i.e. very thick) velcro on mine - and its never budged. Cheap too.

Nick

MadDogWRX 13 September 2004 10:51 PM

The box will be housing 3 10 inch JL w6`s so will probably be to heavy for velcro.

Thanks for the feedback so far.

willy 14 September 2004 07:55 AM

OK, a good compromise would be to get a piece of mdf and use stikaflex to bond it to the boot floor.(under the boot carpet)
Then you can(carefully) attach some mounts/screw the box down.

Willy

MadDogWRX 14 September 2004 11:10 AM

That sounds like a good idea, cheers


All times are GMT +1. The time now is 06:47 AM.


© 2024 MH Sub I, LLC dba Internet Brands