Defis to fit how??
 

Anyone got an idiots guide to fitting EGT, Oil temp and Boost to a 04 WRX? Photos and direction would be greatly appreciated? Wiring colours where to fit sensors etc??? HHHHEEEEEEEELLLLLLLLPPPPP

Mark

No one seen an idiots guide anywhere??

looks like scoobymania are gona have to do it then?? 5hrs labour tho??!!
Mark

start with Chiark's site for some info although I don't know whether it covers EGT gauges...

5 hrs labour to do the lot isn't bad. For egt gauge they've to drill the downpipe from the turbo to fasten in the sensor. They might also weld on a boss to fit it

Oil temp is fitted above rhs bank of cylinders by replacing a blanking plug, boost fits on the pipe out of the front of the inlet manifold.

Look on the Defi site www.defi.com or www.defi-usa.com site for connection info although there's an instruction book supplied with the gauges (possibly in Japanese but English version is available on the two sites mentioned)

Try doing a search on here, i'm sure i've seen a few bits on fitting Defi gauges on the site.

Had mine fitted at Xtreme in 2 hours.

Worth paying to have them done if you are unsure IMO.

http://www.nevetas.co.uk/albums/albu...dium.sized.jpg