MY93 WRX Brake Pad/Disc Dimensions...
 

Hey Guys,

Trying to find the front and rear brake pad and disc dimensions on my MY93 WRX. I am not sure what size the disc's are either. My rear disc's are vented as well which I was sure that for my year (1993) they should'nt be.

Ideally Looking for the following info.

Front Brakes
Outside Diameter
Hub Diameter
Thickness of Disc's
Pad Dimensions though I could just take one off and draw around it.

Rear Brakes
Outside Diameter
Hub Diameter
Thickness of Disc's
And again Brake Pad diamensions

Currently in touch with a very good freind at TMD Friction who is the Group MotorSport Manager.

Any help would be greatfully appreciated.

Regards

Chris

Can anyone shed some light on this, basically need to know what disc's will fit my Impreza. Can't find anything on the net that gives me the dimensions of the disc's at all. I have found many different sized quoted for my car but none seem to agree. I have measured to the best of my ability but want to make sure before I send any measurements that could be wrong.

So far I have concluded:

Front disc's are Vented, 276mm in Diameter with a 60mm center hole, Rear disc's are Vented, 266mm in diameter with the same 60mm center. Stud pattern is 5 x 100. Do these numbers sound correct. If not please correct me.

Really stuck here and need to try and find them as soon as possible.

Regards

Chris

Hi

All the info I have in EBC's latest catalogue shows:

Front
277mm OD (Nearest to yours) - All Subarus with this dimension use EBC p/n D729 or TGD729
http://www.ebcbrakesdirect.com/car/p...+%2894%2D98%29

Rear
There appears to be only one disc which matches your given 266mm OD AND being Vented:
http://www.ebcbrakesdirect.com/car/p...+%2892%2D94%29

Hope this helps.

Need a price, drop me a line via the contact us page on the site.

Regards

Buck

Thanks Mr Buck, Just what I needed Bud.

Many Thanks & Regards

Chris