ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Northern (England) (https://www.scoobynet.com/northern-england-21/)
-   -   FAO Ayde (https://www.scoobynet.com/northern-england-21/343704-fao-ayde.html)

*Sonic* 11 July 2004 09:57 PM

FAO Ayde
 
Ayde

What spec is your car

That was a good result today, i didnt achieve that in mine last week at Well Lane

Steve

Ayde 12 July 2004 12:20 AM

Sonic,

Lagged H&S DP (no - splitter mod),
Resonated Magnex Centre with Magnex Round BB,
K&N panel filter,
STI intercooler with the Y-pipe (think that red elbow you gave me made all the difference;)).
Its running std boost and std ECU.
I was tempted to put the Blitz NUR Spec on but didnt really have time might have added 1 or 2bhp?
I was expecting 240 - 245 tops, first run it did 249 and I was pleased with that then when I went and had a look at the screen on another run it was showing 264.4 so I am well pleased with that:):):)

Wonder what it would do with a re-map?:)

Ayde:)

*Sonic* 12 July 2004 12:51 AM

Wonder what mine would have done on Prosports rollers (compared to well lane)

mine spec is

Lagged Magnex Twin Dump DP
Resonated Magnex Centre
Scorpion Tuner 5 Backbox
Green Cotton Filter
STI Intercooler (samco hoses, not the elbow etc you have got :D)
Ported & Wrapped Headers
Ported Up-Pipe
PPP ECU

and I got 255bhp 242lb/ft

Although mine was running a bit rich, and broken up-pipe, which I have now replaced today, was working yesterday, otherwise I would have done it then, and took it Prosport today

Ive still got 3 port boost solenoid, VF24 Turbo, FPR, and uprated fuel pump to go on mine

then a Tek 3 Remap :)

Good results from yours tho

Ayde 13 July 2004 02:13 PM

Got a slight (can hardly notice it) vibration on one of my header heat shields (Prosport picked up on it last time it went in for its service - its only since they told me I have noticed it). So I may take the headers and up-pipe off at some point if it gets louder and have a go at porting them and then wrap them (might wrap the centre section up to the start of the back box while I am doing it)? Who did you get yours off Sonic - seem to remember you posting something about exchanging them?
Is there a noticable difference from the ported ones?

Cheers,

Ayde:)

*Sonic* 13 July 2004 05:52 PM

LOL Pete @ Prosport told me pretty much the same thing, I wonder if he is in league with Jim Litten who did my headers :)

Actually I knew my up-pipe sheilds had broke, but Pete let me know about it too

As above Jim Litten did mine, he posts more on 22b, but he was at the RR day on Sunday, Silver MY99

Difficult to say if there is any difference to be honest, as I dont think my car is running quite as it should, but I have finally changed my up-pipe now for a ported one (and one that isnt broke :) )

Ive still got the VF24 Turbo to go on, and a remap yet, but it should be good for 300bhp when all done :)

Steve


All times are GMT +1. The time now is 01:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands