ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Defi/Knocklink in line fuse (https://www.scoobynet.com/general-technical-10/342284-defi-knocklink-in-line-fuse.html)

dwk* 06 July 2004 11:47 AM

Defi/Knocklink in line fuse
 
What rating of fuse should I use for this?

I am going to tap into the hazzard switch on an MY00 for all connections, do I need a fuse at all?

Done a search but can't find anything.

roguck 06 July 2004 01:01 PM

better to tap into the fag lighter as it is live when the engine is on whereas the hazards are live when all the time.

dwk* 06 July 2004 02:47 PM

Thanks roguck, but I've already checked the hazzard switch with a test bulb and have all four I require there, permenant live, ignition on live, illumination live and earth.

Anyone fitted an in line fuse (or decided not to) to their Defi/Knocklink that can help out please?

Ta

vindaloo 06 July 2004 03:07 PM

Are the hazard lights fused at all? Through the fusebox(es). Figure what AMP inline you'd need and if the fusebox one is much bigger, fit the inline.

I'd always fit an inline but then I'm clumsy and a worrier. I'd always think I'd stuffed it up or worry about wires chaffing on sharp edges.

J.

The_Judge 06 July 2004 03:36 PM

I used a 1amp which I got from Halfords. Seems to work alright, and hasn't blown yet... :) I would use one though, just in case. As Vindaloo says, you never know.

dwk* 06 July 2004 08:09 PM

Cheers dudes

I will buy a few tomorrow, I want to have everything I need for the gauges getting here, coz I'm gagging to see them working. :D


All times are GMT +1. The time now is 08:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands