ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   RichBrook Sorround for MY98 (https://www.scoobynet.com/interior-15/340286-richbrook-sorround-for-my98.html)

SamUK 29 June 2004 04:07 PM

RichBrook Sorround for MY98
 
Was thinking of getting a Sorround for MY98, but looking at the pics, its putting me off...as it does not seem that it will do the car any justise...

http://www.speeding.co.uk/acatalog/copy_of_Subaru.html

The Justy sorround looks allot better then the one for the imprezza??

Has anyone got a Richbrook sorround fitted to there Scooby that i can see a pic of?

Sam

Dyney 29 June 2004 07:17 PM

First time I've seen it!


ONLY FITS MODELS WITH CENTRE CONSOLE GLOVE BOX
So it will ony fit MY99/00 cars with the flip up dash tray :(

markwild 29 June 2004 10:21 PM

Got this one from TSL - (+ I added the MOMO knob..) - On my 98my UK...

Mark
http://www.wildsworld.co.uk/images/2...5_125108AA.JPG

SamUK 30 June 2004 11:30 AM

Mark,

Looks allot better then Richbrooks sorround!...

Soes the leather gaiter not fold down in to the hole?

Have you got a website address for TSL?

Sam

markwild 30 June 2004 12:21 PM

I had to alter it slightly to fit the MOMO knob - it comes with a steel one, that was a bit cold in the winter ! - The mod was simply to put a roll of tape under the top of the leather gaiter, inside, around the gearstick (This is done by turning the gaiter inside out, over the gearknob)....

So, in short - No, it doesn't go down the hole....

Address is TSL

Good Hunting....

Mark

PS _ Mines actually fitted over a quickshift, but I'm sure it fits either...

martyrobertsdj 30 June 2004 03:08 PM

I think the Richbrook one looks a bit tacky due to the fact it is chrome finished.

If it was a matt/brushed finish, it would look a lot better.

The TSL one seems to be matt.

RE: Momo knob (ooooer). I got one from USA (eBay.com...search for "Sti") and it has a proper groove machined into it to hold the top end of the gaiter. I think some Momo knobs that come from MGF's, etc are nearly the same, but don't have this groove.

Marty

SamUK 30 June 2004 04:19 PM

Just ordered one from Scoobyparts....

http://www.scoobyparts.com/main.asp?link=shop

Click interior at top, then scroll down...Seems to look ok..guess i'l find out when i get it....

ETCHED LOOK CHROME GEAR GAITER SURROUND - E80032


Sam


All times are GMT +1. The time now is 08:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands