ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Security (https://www.scoobynet.com/security-16/)
-   -   laserline alarm (https://www.scoobynet.com/security-16/338137-laserline-alarm.html)

fitzscoob 22 June 2004 01:31 PM
laserline alarm
 
Hi all, I have a laserline alarm on my car, for some reason when I press the arm button the lights flash and the car locks but the alarm makes no noise.

This has happened before and it bugs the life outa me. Is there a way of getting the beeps back :P ?

thanks

Fixel 23 June 2004 10:16 AM
There is a way to do this with the 996V3. Unfortunately, it doesn't work on the 996 - I've been trying to turn off the beeping without luck :(

Drop laserline an email (info@laserlinedirect.com) and ask them to send you a copy of the manual for your system. They sent me a copy of the 996V3 manual, but I don't have it to hand to copy the bit about enabling/disabling the beeps.

Will try to remember to post the info later on. :)

fitzscoob 23 June 2004 10:53 AM
thanks :)

Fixel 23 June 2004 09:57 PM
TO ENABLE/DISABLE AUDIBLE CONFIRMATION TONES
With the alarm system disarmed, enter the vehicle and close all doors/bonnet. Turn on the
vehicle ignition, open the driver’s door, then press the arm/disarm button on the remote
control and look for the following confirmation:
Enabled = The dash fascia LED will flash once accompanied by a short tone from the siren.
Disabled = The dash fascia LED will flash twice without a siren tone.
Turn off the vehicle ignition, close all doors and arm the alarm in the usual way.
That's for the 996V3. Hope it works on yours.

fitzscoob 24 June 2004 07:40 AM
most appreciated

quattrojm 25 June 2004 06:10 PM
any ideas how you can tell if you have a v1, v2 or v3?

Fixel 25 June 2004 08:51 PM
No idea but I'd be interested to know.

Squeaky 03 March 2018 06:26 PM
Originally Posted by fitzscoob (Post 3451342)
Hi all, I have a laserline alarm on my car, for some reason when I press the arm button the lights flash and the car locks but the alarm makes no noise.

This has happened before and it bugs the life outa me. Is there a way of getting the beeps back :P ?

thanks
no sound laser line, mine is the same and the siren is kput and I cant find another any were

johned 03 March 2018 08:59 PM
Originally Posted by fitzscoob (Post 3451342)
Hi all, I have a laserline alarm on my car, for some reason when I press the arm button the lights flash and the car locks but the alarm makes no noise.

This has happened before and it bugs the life outa me. Is there a way of getting the beeps back :P ?

thanks
I thought it was illegal in the uk to have the alarm make a noise when arming and disarming.


All times are GMT +1. The time now is 04:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands