ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   compression test figures (https://www.scoobynet.com/drivetrain-11/337219-compression-test-figures.html)

binksy 73 18 June 2004 07:51 PM

compression test figures
 
Hi can anyone tell me wot sort of compression test figures i should be getting from a standard impreza sti version 5 engine with 61k on it? Are the figures lower on the turbo side of the engine, cylinders 1n3? Cheers Steve.

Bob Rawle 18 June 2004 08:41 PM

Compression with the throttle fully open and all plugs removed cranking at 200-300 rpm.

std 146 to 175 psi (10.1-12.3 bar)

wear limit (worst ... 138 psi (9.7 bar)

this is the important bit ... difference between all 4 cylinders 7 psi (0.5bar) max.

so whatever level they are at the differential applies.

so no cylinders 1 and 3 "should not" be lower in that sense.

the wide range reflects the compression ratio tolerance of 7.8-8.2 to 1

bob


All times are GMT +1. The time now is 12:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands