In car footage from the Scooby Shoot OUt
Thanks to Daid Wallis for hosting, and Scoobyduck for the video.
My car in the 1/4 final against Guinness. Mine ran a 12.75, Alans a 12.12. Problem with 5th gear, watch the knocklink light up. Enjoy http://www.wallis2000.co.uk/bloody5thgear.wmv |
bump
|
Cool Vid :cool:
Gutted about 5th gear....Knocklink certainly lit up! :D |
Nice video ... what are you saying just as you strike the wheel in frustration?? Immediately after which you seem to swerve ever so slightly?? ;)
|
No major problems i hope when hitting 5th ?
Awesome sound though from inside the car, nice, deep burble! |
hes pissed off about a slight problem (missing 5th) swevered so he didnt hit timing gear :)
|
D'oh, that bloody fifth made all the difference....gutted for you!!!
|
video
wikid vid matey, shame about the 5th gear fella, still an awesome time :)
|
gutted for ya steve..better luck next year..car sounds awesome..good times mate but i know you hoped for better..see ya sunday :D
|
Out of interest mate what mods have you done to your car?
Sounds nice :D |
Originally Posted by steve_g
Out of interest mate what mods have you done to your car?
Sounds nice :D not :eek: |
Originally Posted by SirFozzalot
Cool Vid :cool:
Gutted about 5th gear....Knocklink certainly lit up! :D |
The engine bounced off the limiter with now load. Probably lit up just because of general noise, and not det, as it earlier sat on the limiter in 6th from just over the half mile mark, with no det at all.
I engaged 5th per the stick, lifted clutch off at same time as flooring it, and had no drive. Conclusion, think i was beating the syncros |
my conclusion is he cant drive and really missed a gear ;)
David |
what r u running on
cheers paul |
Originally Posted by David_Wallis
my conclusion is he cant drive and really missed a gear ;)
David |
Just for reference the FQ300 runs high 12's 1/4 in standard trim :D:D
Got times though mate ;) |
Just for reference the FQ300 runs high 12's 1/4 in standard trim |
The engine is still running in, only running at 1bar boost in that clip. Who cares what an evo will do :D
|
yeah but the standard evo's get pushed off a cliff to hit 1/4 miles in high 12's :D
|
scrappydoo..
It would take a brave evo to try it on.. 1/4 mile isnt everything.. once the gearing issue is sorted then it will be very quick.. It can pull to the limiter in 6th no probs :) http://www.stevend.org/uploads/eb2.jpg http://www.stevend.org/uploads/eb3.jpg http://www.stevend.org/uploads/spdatshootout2004.jpg |
Originally Posted by P20SPD
The engine bounced off the limiter with now load. Probably lit up just because of general noise, and not det, as it earlier sat on the limiter in 6th from just over the half mile mark, with no det at all.
I engaged 5th per the stick, lifted clutch off at same time as flooring it, and had no drive. Conclusion, think i was beating the syncros |
The engine is still running in |
:D Running in my style. Target boost will be 1.4/1.5bar once we get going.
The rpm limit thing was Marks fault, he said just bounce it off the limiter, so i did ;) |
IMO remove the limiter and change up when the valves start bouncing ;) :D
|
David,
You are right, 1/4 mile isnt everything, i forgot the twisties lmao:D:D:D |
Unlucky, should have gone to Spec Savers. :D
|
I think i've got a Vid of you doing that somewhere Rich..... RA box anyone? :p
will try and post it, but WMP v9 codecs just crash Premier when i try and export now ! :( |
The RA kit takes some getting used to ;) So where's the footage :D
|
All times are GMT +1. The time now is 03:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands