apexi afc????
 

hi guys
last week i bought an sti wagon number 100 of 200 its an import on an l plate.inside the car there is an apexi afc it has 5 knobs you can turn.currently they are at 0 but you can turn them - or you can turn them up to +20.there is no manual with it so i havent got a clue what it should be at or how to work the thing.has anyone have this fitted?and could you please tell me what it should be set at or what it would be good for my car to be at for performance!
i have a full stainless steel system induction kit and also a boost valve fitted but thats currently turned off if thats any help.
also it costs me £30 for a full tank but i get 100 miles to the tank if driven hard but probably around 140 150 if driven easy is this normal for this type of car or do you think something is wrong??
id really appreciate any advice at all you can give
cheers

Try Apexi Docs . Its from the American site so may differ from what you have - but it may give you some idea of the unit.

jhdee

im in the exact same position as stiwagon mine came with an apexi afc too,all the dials on 0

downloaded the manual doesnt really help, where in sheffield can anyone reccommend taking my car to have it set up correctly
thanks

The SAFC intercepts the signal from the airflow sensor to the ecu.
Each dial can be turned to increase/decrease the signal for the RPM range that it applys to.
This in effect tricks the ecu to supplying more or less air, depending on which way the dial is turned.
Be aware that if you increase the dial setting, you are also advancing the ignition timing.

Proceed with extreme caution ;)