WRX WAGON SCOOBYECU
 

Just a note to let all the people know who signed upto the WRX WAGON SCOOBYECU thread that Paul is happy with the numbers and that he will be looking for about two gunnie pigs to develop the chip in the future. So we have a green light at the mo but I cannot say how far this is as Paul is busy. If you want you can email me your name, car details (oviously not the reg!) and your area (oviously not your street! etc) so that i have contacts to come back to soon. This will also give me an idea of the logistics for the tests and final distributions etc. Also mention if you will be willing to let your car be the piggy!!!

If anyone has anything to add please do so.

ta ta

Andy

1996 WRX WAGON with fujitsubo exhaust and green induction kit.

You have PM

Address to send details is!

andy_davies0@hotmail.com

WRX Wagon Scoobyecu
 

Hi andy.

Just sent you PM


Silver 94 WRX Wagon

ITG Panel Filter
Scooby sport back box
Plat Plugs

Cheers

Mark.

Hi Andy,

e-mailed you today!!

Good work mate

anymore?

I'm interested,

95 WRX Wagon, totally standard (still :( )

Gus

Me too. Let us know the out come(my95 wagon)

Andy

bttt

1995 WRX Wagon, Standard apart from panel filter and fuel pump. Location - Hertfordshire, nr. Hemel Hempstead. Happy to be of assistance.....

Rich

Just wondering if there had been any movement on this, or whether there were enough people interested. Only asking because i am quite desperate for an ecu upgrade, and have been offered one by a guy in Oz.

Cheers

Andy
Emailed you my details could you let me know if you got them?
thanks
Benno

latest
 

yes i have your details.

Latest news

have gone back to paul and said we have plenty of gunnie pigs and buyers.
Have asked for a date - still waiting for reply.

Any news on this?

Rich

bttt desperate for more power!! :D

Do you have a link to the thread mentioned above?

http://bbs.scoobynet.co.uk/showthrea...=321152&page=2

Rich

Any more news??

will be asking pavlo ho whe is for time and boards as soon as he is over the scoobyshootout and as soon as i get my funds. Im bloody broke now.
Fitted dawes in the meantime. Transformed the car. It drives so much better.
not running too much boost either, just shy of 1 bar.

Andy

Sounds good!! You recommend the Dawes then?!?!

Andy
Wouldn't mind seeing a pic of where you mounted the boost gauge, I want to install one so I can run a dawes too but I don't want the guage to be too prominent. Suggestions from anyone else on discreet mounting locations for a boost gauge also welcome.
Benno

defo!!

Mounted my guage in front of the instrument pod (just behind the wheel). When looking from a driving position, looks like a small guage in the middle of the Rev counter. Does look a bit intrusive from the passenger side though!!!

i bought a pilar pod - doesnt look too bad

I fitted mine in the centre right hand air vent , bought a piece of carbon fibre backed plastic with the 52 mm hole in it £8, removed air vent surrond , then remove right hand air vent fill the gap with the plastic once you have and cut it and shaped it to fit the air vent gap then pop in your boost gauge £36 race-tec type ,wire and pipe up ,then replace air vent surround with air vent still in the left hand side and boost gauge on the right , looks neat and tidy without the need for a boost pod fixed to the dash . Gauge can easily be removed and vent put back.

Mark

Pictures please Mark, would be interesting to see just how it looks?

Incase it is of interest to any of you guys, the JECS O/E ECU from my 95 WRX Wagon is for sale. (along with a Superchip that was on the same vehicle. Both items separate)
Wagon did 13.99 with superchip, filter and exhaust.

you have pm

Any news on this yet??

LATEST IS I HAVE NOT HEARD FROM PAVLO FOR SOME TIME. i HAVE SENT SEVERAL EMAILS.

I AM NOW CONCIDERING A CHIP FORM OZ NOW. HAVE MADE A CONTACT THEIR AND MAY TRY TO BRING SOME OVER IN BULK.
I HAVE BEEN ASSURED IT WILL WORK WITH THE TD004